The Hikvision DS-PDD15AM-EG2 is a wired dual-tech detector that combines PIR with 24 GHz smart microwave and adds anti-masking, anti-cloaking and anti-blocking detection for higher-security sites. It covers 15 m with an 85.9° angle and 52 detection zones.
Its non-interfering technology allows back-to-back installation without penetration through the wall, so it can be installed and set up quicker than traditional dual-tech detectors. Automatic sensitivity, digital temperature compensation and IFT technology help prevent false alarms. It runs on 9–16 VDC and provides a normally closed (NC) alarm output.
Note: this is a wired detector. It connects by cable to a wired zone of an alarm control panel or input expander (see "Works With" below).
What Is Anti-Masking?
Anti-masking means the detector notices if someone tries to disable it while the alarm is off, for example by covering the lens, spraying it or placing something in front of it. It then sends a warning to the alarm panel, so you know the detector has been tampered with before you arm the system.
Anti-cloaking: helps detect an intruder trying to hide their body heat from the PIR sensor.
Anti-blocking: detects an object placed close in front of the detector to block its view.
Key Features
Dual technology: PIR + 24 GHz smart microwave
15 m detection range, 85.9° angle, 52 detection zones
Anti-masking, anti-cloaking and anti-blocking detection
Automatic sensitivity
Digital temperature compensation and IFT technology
Non-interfering technology allows back-to-back installation
Creep-zone protection and sealed optics
Front tamper protection
9–16 VDC wide voltage range
Optional wall and ceiling brackets (sold separately)
Works With
Wired alarm panels: connects to a wired zone input, e.g. the on-board zones of the AX Hybrid PRO DS-PHA48-EP(B) and DS-PHA64-LP(B) panels or the DS-PHA64-KIT-WB(B) kit
Zone expansion: DS-PM1-I8O2-H 8-zone wired input expander for AX Hybrid PRO panels
Technical Specifications
Specification
Details
Model
DS-PDD15AM-EG2
Product Name
Wired Dual-Tech AM Detector
Detection Method
Passive infrared (PIR) + microwave
Detection Range
15 m
Detection Angle
85.9°
Detection Zones
52
Detectable Speed
0.3–2 m/s
Sensitivity
Auto / Low
Microwave Frequency
24 GHz (24.15–24.25 GHz)
White Light Filter
6500 lux
Anti-Masking / Anti-Cloaking / Anti-Blocking
Supported
Digital Temperature Compensation
Supported
Creep Zone Protection
Supported
Sealed Optics
Supported
Tamper Protection
Front
Alarm Output
Normally Closed (NC)
LED Indicator
Green (PIR), red (microwave), blue (alarm)
Transmission Method
Wired
Power Supply
9–16 VDC (12 VDC typical)
Current Consumption
25 mA max., 17 mA quiescent @ 12 VDC
Mounting Height
1.8–2.4 m
Mounting Method
Wall (optional wall and ceiling bracket)
Application
Indoor
Operating Temperature
-10 °C to 55 °C
Operating Humidity
10% to 90%
Dimensions (W × H × D)
65.7 × 103.8 × 45.5 mm
Weight
100 g
Why Choose the Hikvision DS-PDD15AM-EG2?
Anti-masking, anti-cloaking and anti-blocking for higher-security areas
PIR plus microwave confirmation helps cut false alarms
Longer 15 m range
Faster installation with back-to-back mounting
Downloads
⬇ Download Datasheet (PDF)
Warranty: 12-month warranty from the Official Distributor.
The Hikvision DS-PDP18-EG2(B) is a compact wired passive infrared (PIR) detector with a slim, modern housing that suits most rooms. It gives up to 18 m of volumetric coverage with an 85.9° angle and mounts on a wall or ceiling.
3D optics, automatic sensitivity, digital temperature compensation and creep-zone protection help it detect moving targets accurately, while protection against insects, air currents and internal reflections plus IFT technology help prevent false alarms. Pet immunity is selectable up to 15 kg, and selectable alarm and tamper EOL resistors simplify wiring.
Note: this is a wired detector. It connects by cable to a wired zone of an alarm control panel or input expander (see "Works With" below).
Key Features
Up to 18 m volumetric coverage, 85.9° angle
Slim, modern housing
3D optics focusing infrared energy on the pyro-electric sensor
Automatic sensitivity and digital temperature compensation
Creep-zone protection below the detector
Pet immunity: 5 kg (high), 10 kg (auto), 15 kg (low)
Selectable alarm and tamper EOL resistors
Protection against insects, air currents and internal reflections
9–16 VDC wide voltage range with reverse polarity protection
IFT technology to help prevent false alarms
Wall or ceiling mounting
Works With
Wired alarm panels: connects to a wired zone input, e.g. the on-board zones of the AX Hybrid PRO DS-PHA48-EP(B) and DS-PHA64-LP(B) panels or the DS-PHA64-KIT-WB(B) kit
Zone expansion: DS-PM1-I8O2-H 8-zone wired input expander for AX Hybrid PRO panels
Technical Specifications
Specification
Details
Model
DS-PDP18-EG2(B)
Product Name
Wired PIR Detector
Detection Method
Passive infrared (PIR)
Detection Range
18 m
Detection Angle
85.9°
Detectable Speed
0.3–2 m/s
Sensitivity
High / Auto / Low
Pet Immunity
5 kg (high), 10 kg (auto), 15 kg (low)
White Light Filter
6500 lux
Creep Zone Protection
Supported
Tamper Protection
Front
Alarm EOL Resistors
1K, 2K2, 4K7, 5K6, 8K2 (selectable)
Tamper EOL Resistors
1K, 2K2, 4K7, 5K6 (selectable)
LED Indicator
Blue (alarm)
Power Supply
9–16 VDC (12 VDC typical)
Current Consumption
12 mA max.
Mounting Height
1.8–2.4 m
Mounting Method
Wall or ceiling (optional bracket)
Application
Indoor
Housing
PC + ABS
Operating Temperature
-10 °C to 55 °C
Operating Humidity
10% to 90%
Dimensions (W × H × D)
65.4 × 86.8 × 45.5 mm
Weight
68 g
Why Choose the Hikvision DS-PDP18-EG2(B)?
Long 18 m coverage from a compact, discreet detector
Adjustable pet immunity up to 15 kg
Accurate detection with 3D optics and digital processing
Easy wiring with selectable EOL resistors
Downloads
⬇ Download Datasheet (PDF)
Warranty: 12-month warranty from the Official Distributor.
The Hikvision DS-PDBG8-EG2 is an indoor wired glass break detector that uses a high-quality omni-directional microphone to listen for the sound of breaking glass. It covers up to 8 m with a 120° angle and mounts on a wall or ceiling.
It detects float, plate, tempered, wired, laminated and double-glazed glass from 2.4 to 6.4 mm thick, with sensitivity adjustable by a potentiometer. It runs on 9–16 VDC, provides a normally closed (NC) alarm output and has selectable EOL resistors and front tamper protection.
Note: this is a wired detector. It connects by cable to a wired zone of an alarm control panel or input expander (see "Works With" below).
Key Features
Acoustic sensor with a high-quality omni-directional microphone
Up to 8 m / 120° detection coverage
Detects float, plate, tempered, wired, laminated and double-glazed glass
Glass break sensitivity adjustable by potentiometer
Selectable EOL resistors (1K, 2K2, 4K7, 5K6, 6K8)
Digital processing
Front tamper protection
9–16 VDC wide voltage range with reverse polarity protection
Wall or ceiling mounting
Works With
Wired alarm panels: connects to a wired zone input, e.g. the on-board zones of the AX Hybrid PRO DS-PHA48-EP(B) and DS-PHA64-LP(B) panels or the DS-PHA64-KIT-WB(B) kit
Zone expansion: DS-PM1-I8O2-H 8-zone wired input expander for AX Hybrid PRO panels
Technical Specifications
Specification
Details
Model
DS-PDBG8-EG2
Product Name
Wired Glass Break Detector
Detection Method
Acoustic sensor
Detection Range
8 m
Detection Angle
120°
Glass Break Sensitivity
Adjustable by potentiometer
Glass Types
Float, plate, tempered, wired, laminated, double glazing
Glass Thickness
2.4–6.4 mm
Glass Size
0.3 × 0.3 m to 3 × 3 m
Digital Processing
Supported
Tamper Protection
Front
Alarm Output
Normally Closed (NC)
Alarm EOL Resistors
1K, 2K2, 4K7, 5K6, 6K8 (selectable)
LED Indicator
Red (high-frequency trigger), green (low-frequency trigger), blue (alarm)
Transmission Method
Wired
Power Supply
9–16 VDC (12 VDC typical)
Current Consumption
25 mA @ 12 VDC
Mounting Method
Wall or ceiling
Application
Indoor
Operating Temperature
-10 °C to 55 °C
Operating Humidity
10% to 90%
Dimensions (W × H × D)
38.8 × 107 × 22.5 mm
Weight
49.5 g
Why Choose the Hikvision DS-PDBG8-EG2?
Protects windows and glass doors before an intruder gets in
One detector covers several windows in an 8 m / 120° area
Works with most common glass types
Simple wiring with selectable EOL resistors
Downloads
⬇ Download Datasheet (PDF)
Warranty: 12-month warranty from the Official Distributor.
Explore security alarm systems designed to help protect your home, office, or shop. Choose suitable security solutions for your space and needs from Bestways Jordan.
