The Hikvision AX PRO Kit (DS-PWA96-KIT-WB) is a complete 433 MHz wireless intrusion alarm kit built around the AX PRO DS-PWA96-M-WB control panel. The panel handles up to 96 wireless zones (including up to 48 PIRCAMs) in 32 areas and connects through wired LAN, Wi-Fi and built-in 3G/4G with dual SIM slots. The box contains the control panel, a wireless PIR detector with pet immunity, a wireless door/window magnetic contact and a keyfob. Arm, disarm and check the system from the Hik-Connect app, receive alarm notifications on your phone, and add more AX PRO detectors, keypads, sirens and repeaters as your property grows. Note: this is a 433 MHz (-WB) system. Expand it only with 433 MHz (-WB) AX PRO devices; 868 MHz (-WE) devices do not pair with it (see "Works With" below). Key Features Up to 96 wireless zones (up to 48 PIRCAMs) and 32 areas Wired LAN, Wi-Fi and built-in 3G/4G with dual SIM slots 433 MHz two-way wireless with frequency hopping and AES-128 encryption Hik-Connect app for remote arming, disarming, alarm notifications and diagnostics Away and Stay arming, automatic arm/disarm timers and forced arming with open zones Supports up to 48 keyfobs, 8 keypads, 6 wireless sounders (3 internal + 3 external) and 4 repeaters Built-in loudspeaker with voice prompts and built-in tag reader 5,000-event memory log and alarm receiving centre support (SIA DC-09, Contact ID) Built-in Li backup battery, up to 12 hours at normal temperature Works With Keypads: DS-PK1-LT-WB (LCD with tag reader) and DS-PK1-E-WB Outdoor siren and range: DS-PS1-E-WB wireless external sounder and DS-PR1-WB wireless repeater Extra detectors and controls: DS-PDP15P-EG2-WB PIR detector, DS-PKF1-WB keyfob, DS-PDEB1-EG2-WB and DS-PDEBP1-EG2-WB emergency buttons Apps: Hik-Connect for users, Hik-ProConnect for installers Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PWA96-KIT-WB (control panel DS-PWA96-M-WB) Product Name AX PRO Kit (433 MHz) Wireless Zones 96 (up to 48 PIRCAMs) Areas 32 Users 1 admin, 1 installer, 46 users Tags 48 Keyfobs / Keypads 48 / 8 (including tag reader keypads) Wireless Sounders 6 (3 internal + 3 external) Wireless Repeaters 4 Memory Log 5,000 events RF Frequency 433 MHz, two-way Wireless Security Frequency hopping, AES-128 encryption Network Wired LAN, Wi-Fi Cellular 3G/4G on board, dual SIM Programming Tools Hik-Connect, Hik-ProConnect, Web Portal, iVMS-4200, Convergence Cloud ARC Protocols SIA DC-09 (SIA level 2, Contact ID), ISUP, ISAPI LED Status Arm/disarm, alarm, tamper, fault, cloud, power Power Supply Built-in power supply Backup Battery Built-in Li battery, up to 12 hours at normal temperature Operating Temperature -10 °C to +55 °C Panel Dimensions (W × H × D) 170 × 170 × 38.6 mm Panel Weight 557.5 g Housing / Color Plastic / white What's in the Box 1 × DS-PWA96-M-WB AX PRO control panel 1 × DS-PDP15P-EG2-WB wireless PIR detector 1 × DS-PDMC-EG2-WB wireless magnetic contact 1 × DS-PKF1-WB wireless keyfob Why Choose the Hikvision DS-PWA96-KIT-WB? A complete starter kit: panel, motion detector, door/window contact and keyfob in one box Three ways to connect: wired LAN, Wi-Fi and 4G with dual SIM Scales to 96 zones and 32 areas for villas, shops and offices No alarm cabling, with setup and maintenance through the app Downloads ⬇ Download User Manual (PDF) Warranty: 12-month warranty from the Official Distributor.
170.000 JD
The Hikvision AX PRO Kit (DS-PWA64-KIT-WB) is a 433 MHz wireless intrusion alarm kit built around the AX PRO DS-PWA64-L-WB control panel. The panel handles up to 64 wireless zones (including up to 48 PIRCAMs) in 16 areas and connects through wired LAN, Wi-Fi and built-in GPRS (2G) with a single SIM slot. The box contains the control panel, a wireless PIR detector with pet immunity, a wireless door/window magnetic contact and a keyfob. Arm, disarm and check the system from the Hik-Connect app, receive alarm notifications on your phone, and add more AX PRO detectors, keypads, sirens and repeaters when you need them. Note: this is a 433 MHz (-WB) system. Expand it only with 433 MHz (-WB) AX PRO devices; 868 MHz (-WE) devices do not pair with it (see "Works With" below). Key Features Up to 64 wireless zones (up to 48 PIRCAMs) and 16 areas Wired LAN, Wi-Fi and built-in GPRS (2G) with a single SIM slot 433 MHz wireless with frequency hopping and AES-128 encryption Hik-Connect app for remote arming, disarming, alarm notifications and diagnostics Away and Stay arming, automatic arm/disarm timers and forced arming with open zones Supports up to 32 keyfobs, 8 keypads, 4 wireless sounders (2 internal + 2 external) and 2 repeaters Built-in loudspeaker with voice prompts 5,000-event memory log and alarm receiving centre support (SIA DC-09, Contact ID) Built-in Li backup battery, up to 12 hours at normal temperature Works With Keypads: DS-PK1-LT-WB (LCD with tag reader) and DS-PK1-E-WB Outdoor siren and range: DS-PS1-E-WB wireless external sounder and DS-PR1-WB wireless repeater Extra detectors and controls: DS-PDP15P-EG2-WB PIR detector, DS-PKF1-WB keyfob, DS-PDEB1-EG2-WB and DS-PDEBP1-EG2-WB emergency buttons Apps: Hik-Connect for users, Hik-ProConnect for installers Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PWA64-KIT-WB (control panel DS-PWA64-L-WB) Product Name AX PRO Kit (433 MHz) Wireless Zones 64 (up to 48 PIRCAMs) Areas 16 Users 1 admin, 1 installer, 30 users Tags 32 Keyfobs / Keypads 32 / 8 (including tag reader keypads) Wireless Sounders 4 (2 internal + 2 external) Wireless Repeaters 2 Memory Log 5,000 events RF Frequency 433 MHz Wireless Security Frequency hopping, AES-128 encryption Network Wired LAN, Wi-Fi Cellular GPRS (2G) on board, single SIM Programming Tools Hik-Connect, Hik-ProConnect, Web Portal, iVMS-4200, Convergence Cloud ARC Protocols SIA DC-09 (SIA level 2, Contact ID), ISUP, ISAPI LED Status Arm/disarm, alarm, tamper, fault, cloud, power Power Supply Built-in power supply Backup Battery Built-in Li battery, up to 12 hours at normal temperature Operating Temperature -10 °C to +55 °C Panel Dimensions (W × H × D) 170 × 170 × 38.6 mm Panel Weight 557.5 g Housing / Color Plastic / white What's in the Box 1 × DS-PWA64-L-WB AX PRO control panel 1 × DS-PDP15P-EG2-WB wireless PIR detector 1 × DS-PDMC-EG2-WB wireless magnetic contact 1 × DS-PKF1-WB wireless keyfob Why Choose the Hikvision DS-PWA64-KIT-WB? A ready-to-install kit: panel, motion detector, door/window contact and keyfob in one box Wired LAN, Wi-Fi and GPRS (2G) connection options Room to grow: 64 zones and 16 areas for homes, shops and offices No alarm cabling, with setup and maintenance through the app Downloads ⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF) Warranty: 12-month warranty from the Official Distributor.
111.000 JD
The Hikvision AX PRO Wireless PIR Detector (DS-PDP15P-EG2-WB) is an indoor passive infrared motion detector for the AX PRO 433 MHz alarm system. It covers up to 15 m with an 85.9° angle and 52 detection zones, and its pet immunity up to 30 kg helps avoid false alarms caused by pets. It talks to the control panel over Tri-X two-way wireless at 433 MHz with AES-128 encryption, frequency hopping and up to 1.2 km range in open space. One CR123A battery lasts up to 5 years in standby, and every setting can be changed remotely through the app. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features 15 m detection range, 85.9° angle and 52 detection zones Pet immunity up to 30 kg; sensitivity modes High, Auto and Pet SEC (Smart Environmental Control): advanced digital signal processing and 3D optics Digital temperature compensation, creep zone protection, sealed optics and 6500 lux white-light filter Tri-X two-way wireless at 433 MHz, up to 1.2 km in open space, AES-128 encryption Frequency hopping against jamming for reliable transmission Front and rear tamper protection; signal strength and environment temperature indicators Fully remote configurable through the app; enrolment by power-up, remote ID or QR code Easily replaceable CR123A battery with protected PCB, up to 5 years of standby Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB (this detector is included in both kits) AX Hybrid PRO panels: through the DS-PM1-RT-HWB 433 MHz Tri-X wireless receiver (this model is on its official compatibility list) Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDP15P-EG2-WB Product Name Wireless PIR Detector Detection Method Passive infrared (PIR) Detection Range / Angle 15 m / 85.9° Detection Zones 52 Detectable Speed 0.3–2 m/s Sensitivity High, Auto, Pet Pet Immunity Up to 30 kg White Light Filter 6500 lux Tamper Protection Front and rear LED Indicator Blue (alarm) Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Range (Free Space) 1.2 km Transmission Security AES-128 encryption Frequency Hopping Supported Enrolling Method Power-up, remote ID, QR code Battery 1 × CR123A, 3 V Battery Life Up to 5 years (standby) Operating Temperature -10 °C to 55 °C Operating Humidity 10% to 90% Mounting Wall, 1.8–2.4 m high (optional wall and ceiling bracket) Dimensions (W × H × D) 65.5 × 103 × 48.5 mm Weight 128 g Application Indoor Why Choose the Hikvision DS-PDP15P-EG2-WB? Pet immunity up to 30 kg keeps the alarm reliable in homes with pets Smart environmental control and temperature compensation help prevent false alarms Long-range, anti-jamming Tri-X wireless and up to 5 years of battery life The same detector supplied in the AX PRO 433 MHz kits Downloads ⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF) Warranty: 12-month warranty from the Official Distributor.
21.000 JD
The Hikvision AX PRO Wireless Magnetic Contact (DS-PDMC-EG2-WB) is a slim door and window opening detector that alerts the panel as soon as a protected door or window opens, with a detection gap of up to 43 mm. It can be mounted on all types of doors, including metal ones, and its alarm input lets you connect an extra wired detector (NC, NO or impulse count). It connects over Tri-X two-way wireless at 433 MHz with AES-128 encryption, frequency hopping and up to 1.2 km range in open space. One CR123A battery lasts up to 5 years in standby. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Opening contact with up to 43 mm detection gap Slim design for discreet installation Alarm input for an extra wired detector: NC, NO or impulse count Tri-X two-way wireless at 433 MHz, up to 1.2 km in open space, AES-128 encryption Frequency hopping against jamming for reliable transmission Front and rear tamper protection; signal strength and environment temperature indicators Fully remote configurable through the app; enrolment by power-up, remote ID or QR code Up to 5 years of battery life (1 × CR123A) Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB AX Hybrid PRO panels: DS-PHA48-EP(B) and DS-PHA64-LP(B) through the DS-PM1-RT-HWB 433 MHz Tri-X wireless receiver Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDMC-EG2-WB Product Name Wireless Magnetic Contact Detection Method Opening contact Detection Gap 43 mm max Alarm Input NC / NO / impulse count Tamper Protection Front and rear LED Indicator Blue (alarm) Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Range (Free Space) 1.2 km Transmission Security AES-128 encryption Frequency Hopping Supported Enrolling Method Power-up, remote ID, QR code Battery 1 × CR123A, 3 V Battery Life Up to 5 years (standby) Operating Temperature -10 °C to 55 °C Operating Humidity 10% to 90% Dimensions (W × H × D) 22.5 × 103 × 23.2 mm; 13 × 34.4 × 11.4 mm Weight 59 g Application Indoor Why Choose the Hikvision DS-PDMC-EG2-WB? Slim, discreet protection for doors and windows, including metal doors Adds a wired detector to the wireless system through its alarm input Anti-jamming Tri-X wireless with 1.2 km range Up to 5 years of battery life Downloads ⬇ Download Datasheet (PDF) Warranty: 12-month warranty from the Official Distributor.
17.000 JD
The Hikvision AX PRO Wireless External Sounder (DS-PS1-E-WB) is an outdoor siren for the AX PRO 433 MHz alarm system. Its 110 dB buzzer and strobe light warn intruders and neighbours, and three alarm sounds tell intrusion, fire and panic alarms apart. It connects over two-way 433 MHz wireless with AES-128 encryption, frequency hopping and up to 900 m range in open area. The IP65 housing is made for outdoor walls, and the siren runs on its battery for up to 3 years (default) or on a 12 VDC supply. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features 110 dB alarm sound with strobe light 3 alarm sounds: intrusion, fire and panic Two-way 433 MHz wireless, up to 900 m in open area AES-128 encryption and frequency hopping against jamming Front and rear panel tamper protection IP65 protection for outdoor installation Battery powered by default or 12 VDC; up to 3 years of battery life (triggered every two weeks, 90 s alarm each time) Fully remote configurable through the app; multiple enrolment methods and easy installation Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB (up to 3 and 2 external sounders respectively) AX Hybrid PRO panels: through the DS-PM1-RT-HWB 433 MHz Tri-X wireless receiver (this model is on its official compatibility list) Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PS1-E-WB Product Name Wireless External Sounder Sound Level 110 dB Alarm Sounds Intrusion, fire, panic RF Frequency 433 MHz RF Method Two-way communication RF Modulation 2GFSK RF Distance 900 m (open area) Encryption AES-128 Tamper Protection Front and rear Power Supply Battery (default) or 12 VDC Battery Life Up to 3 years (standby) Ingress Protection IP65 Installation Wall mounting Operating Temperature -20 °C to 60 °C Operating Humidity 10% to 90% (non-condensing) Housing PC + ABS Dimensions (W × H × D) 190 × 200 × 47.3 mm Weight 606.5 g Why Choose the Hikvision DS-PS1-E-WB? Loud 110 dB alarm with a strobe light that is seen and heard from outside Weatherproof IP65 housing for outdoor walls No cable to the panel; battery or 12 VDC power Different sounds for intrusion, fire and panic alarms Downloads ⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF) Warranty: 12-month warranty from the Official Distributor.
49.000 JD
The Hikvision AX PRO Wireless Repeater (DS-PR1-WB) extends the wireless range of an AX PRO 433 MHz alarm system in larger homes, villas, offices and multi-floor buildings. It relays two-way 433 MHz communication between the control panel and distant detectors, with up to 800 m range in open area. Smart auto-pairing finds and connects up to 8 PIRCAM or smoke detectors automatically, and LED indicators show registration, signal strength, power and faults. It runs on 100–240 VAC mains power with a built-in Li backup battery that keeps it working during a power cut. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Extends AX PRO 433 MHz wireless coverage, up to 800 m in open area Stable and secure two-way communication Smart auto-pairing: finds and connects up to 8 PIRCAM or smoke detectors automatically LED status: register/signal (green/red), power (green), fault (amber) Built-in Li backup battery keeps it working after mains power is lost Front and back tamper protection 100–240 VAC power supply and wall mounting with an easy-install structure Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB (up to 4 and 2 repeaters respectively) AX PRO 433 MHz devices: detectors, PIRCAMs, smoke detectors and sirens such as DS-PDP15P-EG2-WB and DS-PS1-E-WB Not supported through the repeater: LCD keypads Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PR1-WB Product Name Wireless Repeater RF Frequency 433 MHz RF Method Two-way communication RF Modulation 2GFSK RF Distance 800 m (open area) Wireless Security Supported Auto Pairing Supported (up to 8 PIRCAM or smoke detectors) Keypad LCD keypad not supported Tamper Protection 1, front and back LED Status Register/signal (green/red), power (green), fault (amber) Serial Port 2 (for debugging) Power Supply 100–240 VAC Backup Battery Built-in Li battery, up to 24 hours at normal temperature (shorter at low temperatures) Operating Temperature -10 °C to +55 °C (battery does not charge below 10 °C; keep the adapter connected) Operating Humidity 10% to 90% Installation Wall mounting Dimensions (W × H × D) 150 × 150 × 25 mm Weight 372 g Housing / Color Plastic / white Why Choose the Hikvision DS-PR1-WB? Closes coverage gaps in large or multi-floor properties Auto-pairing makes adding PIRCAM and smoke detectors easy Keeps relaying during power cuts thanks to its backup battery Clear LED feedback for installation and maintenance Downloads ⬇ Download Quick Start Guide (PDF) Warranty: 12-month warranty from the Official Distributor.
50.000 JD
The Hikvision AX PRO Wireless Keyfob (DS-PKF1-WB) is a pocket remote for the AX PRO 433 MHz alarm system. Arm the system in Away or Stay mode or disarm it with one press, without opening the app or walking to a keypad. It works up to 500 m from the panel in open area, uses frequency hopping against jamming, and its key lock prevents accidental presses. The battery lasts up to 3 years in standby and is easy to replace. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Away arm, Stay arm and disarm Keyfob lock and unlock function against accidental presses 433 MHz wireless, up to 500 m in open area 2GFSK modulation with frequency hopping against jamming Fully remote configurable through the app Multiple enrolment methods and easy installation Easily replaceable battery with protected PCB, up to 3 years of standby Light 16 g white housing: plastic panel with rubber gasket Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB (up to 48 and 32 keyfobs respectively; one keyfob is included in each kit) AX Hybrid PRO: this keyfob is included in the DS-PHA64-KIT-WB(B) hybrid alarm kit Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PKF1-WB Product Name Wireless Keyfob Functions Away arm, Stay arm, disarm, key lock RF Frequency 433 MHz RF Modulation 2GFSK RF Distance 500 m (open area) Frequency Hopping Supported Battery Life Up to 3 years (standby) Operating Temperature -10 °C to +55 °C Operating Humidity 10% to 90% (non-condensing) Housing Plastic panel, rubber gasket Color White Weight 16 g Why Choose the Hikvision DS-PKF1-WB? Arm and disarm with one press when you leave or arrive Key lock prevents accidental arming or disarming Light 16 g fob to carry with your keys The same keyfob supplied in the AX PRO and AX Hybrid PRO 433 MHz kits Downloads ⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF) Warranty: 12-month warranty from the Official Distributor.
15.000 JD
The Hikvision AX PRO Wireless Emergency Button (DS-PDEB2-EG2-WB) is a wall-mounted dual-button panic button for the AX PRO 433 MHz alarm system. A press sends an immediate emergency alarm to the control panel, and its two-button design, pressed together to raise the alarm, helps prevent accidental activation. It connects over Tri-X two-way wireless at 433 MHz with AES-128 encryption, frequency hopping and up to 800 m range in free space. A green keymat is available for medical applications, and one CR2450 battery lasts up to 3 years in work status (triggered 20 times per day). Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Dual-button wall-mounted emergency button Two-button activation helps prevent accidental alarms Green keymat available for medical applications Tri-X two-way wireless at 433 MHz, up to 800 m in free space, AES-128 encryption Frequency hopping against jamming for reliable transmission Front and rear tamper protection; signal strength and environment temperature indicators Fully remote configurable through the app; enrolment by power-up, remote ID or QR code 1 × CR2450 battery, up to 3 years in work status (20 triggers per day) Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDEB2-EG2-WB Product Name Wireless Emergency Button Buttons 2 Tamper Protection Front and rear LED Indicator Blue (alarm) Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Range (Free Space) 800 m Transmission Security AES-128 encryption Frequency Hopping Supported Enrolling Method Power-up, remote ID, QR code Battery 1 × CR2450, 3 V Battery Life 3 years in work status (triggered 20 times per day) Operating Temperature -10 °C to 55 °C Operating Humidity 10% to 90% Dimensions 63.8 × 63.8 × 17.9 mm Weight 45.5 g Application Indoor, wall mounting Option Green keymat for medical applications Why Choose the Hikvision DS-PDEB2-EG2-WB? A fast way to call for help from a fixed spot in homes, offices, shops, reception areas and clinics Two-button design reduces accidental alarms Encrypted, long-range Tri-X wireless with tamper protection Battery lasts up to 3 years even with frequent use Warranty: 12-month warranty from the Official Distributor.
14.000 JD
The Hikvision AX PRO Wireless Emergency Button (DS-PDEB1-EG2-WB) is a wall-mounted single-button panic button for the AX PRO 433 MHz alarm system. One press sends an immediate emergency alarm to the control panel, giving a fast way to call for help from a fixed spot. It connects over Tri-X two-way wireless at 433 MHz with AES-128 encryption, frequency hopping and up to 800 m range in free space. A green keymat is available for medical applications, and one CR2450 battery lasts up to 3 years in work status (triggered 20 times per day). Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Single-button wall-mounted emergency button One press sends an immediate emergency alarm Green keymat available for medical applications Tri-X two-way wireless at 433 MHz, up to 800 m in free space, AES-128 encryption Frequency hopping against jamming for reliable transmission Front and rear tamper protection; signal strength and environment temperature indicators Fully remote configurable through the app; enrolment by power-up, remote ID or QR code 1 × CR2450 battery, up to 3 years in work status (20 triggers per day) Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB AX Hybrid PRO panels: through the DS-PM1-RT-HWB 433 MHz Tri-X wireless receiver (this model is on its official compatibility list) Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDEB1-EG2-WB Product Name Wireless Emergency Button Buttons 1 Tamper Protection Front and rear LED Indicator Blue (alarm) Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Range (Free Space) 800 m Transmission Security AES-128 encryption Frequency Hopping Supported Enrolling Method Power-up, remote ID, QR code Battery 1 × CR2450, 3 V Battery Life 3 years in work status (triggered 20 times per day) Operating Temperature -10 °C to 55 °C Operating Humidity 10% to 90% Dimensions 63.8 × 63.8 × 17.9 mm Weight 45.5 g Application Indoor, wall mounting Option Green keymat for medical applications Why Choose the Hikvision DS-PDEB1-EG2-WB? A fast way to call for help from a fixed spot in homes, offices, shops, reception areas and clinics Simple one-press operation that anyone can use Encrypted, long-range Tri-X wireless with tamper protection Battery lasts up to 3 years even with frequent use Warranty: 12-month warranty from the Official Distributor.
14.000 JD
The Hikvision AX PRO Wireless Portable Emergency Button (DS-PDEBP1-EG2-WB) is a small single-button panic button that stays with the user, on a lanyard, a wristband or in a pocket, and sends an emergency alarm to the AX PRO 433 MHz panel from anywhere within wireless range. Accidental press protection helps avoid false alarms. It measures just Ø38 × 12 mm and 13.5 g, has IP66 protection for daily use, and connects over Tri-X two-way wireless at 433 MHz with AES-128 encryption, frequency hopping and up to 800 m range in free space. One CR2032 battery lasts up to 3 years in standby; a lanyard and wristband are available as optional accessories. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Portable single-button emergency button Accidental press protection IP66 protection for daily use Tri-X two-way wireless at 433 MHz, up to 800 m in free space, AES-128 encryption Frequency hopping against jamming for reliable transmission Red / green LED indicator and signal strength indicator Fully remote configurable through the app; enrolment by power-up, remote ID or QR code 1 × CR2032 battery, up to 3 years of standby Optional lanyard and wristband accessories Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB AX Hybrid PRO panels: through the DS-PM1-RT-HWB 433 MHz Tri-X wireless receiver (this model is on its official compatibility list) Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDEBP1-EG2-WB Product Name Wireless Portable Emergency Button Buttons 1 Tamper Protection None LED Indicator Red / green Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Range (Free Space) 800 m Transmission Security AES-128 encryption Frequency Hopping Supported Enrolling Method Power-up, remote ID, QR code Battery 1 × CR2032, 3 V Battery Life Up to 3 years (standby) Operating Temperature -10 °C to 55 °C Operating Humidity 10% to 90% Ingress Protection IP66 Dimensions Ø38 × 12 mm Weight 13.5 g Application Portable Why Choose the Hikvision DS-PDEBP1-EG2-WB? Help is one press away wherever the user is, ideal for elderly people, patients and staff Tiny and light, with IP66 protection for everyday wear Accidental press protection reduces false alarms Encrypted, long-range Tri-X wireless and up to 3 years of battery life Downloads ⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF) Warranty: 12-month warranty from the Official Distributor.
14.000 JD
The Hikvision AX PRO Wireless Portable Emergency Button (DS-PDEBP2-EG2-WB) is a small dual-button panic button that stays with the user, on a lanyard, a wristband or in a pocket, and sends an emergency alarm to the AX PRO 433 MHz panel from anywhere within wireless range. Accidental press protection helps avoid false alarms. It measures just Ø38 × 12 mm and 13.5 g, has IP66 protection for daily use, and connects over Tri-X two-way wireless at 433 MHz with AES-128 encryption, frequency hopping and up to 800 m range in free space. One CR2035 battery lasts up to 3 years in standby; a lanyard and wristband are available as optional accessories. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Portable dual-button emergency button Accidental press protection IP66 protection for daily use Tri-X two-way wireless at 433 MHz, up to 800 m in free space, AES-128 encryption Frequency hopping against jamming for reliable transmission Red / green LED indicator and signal strength indicator Fully remote configurable through the app; enrolment by power-up, remote ID or QR code 1 × CR2035 battery, up to 3 years of standby Optional lanyard and wristband accessories Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDEBP2-EG2-WB Product Name Wireless Portable Emergency Button Buttons 2 Tamper Protection None LED Indicator Red / green Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Range (Free Space) 800 m Transmission Security AES-128 encryption Frequency Hopping Supported Enrolling Method Power-up, remote ID, QR code Battery 1 × CR2035, 3 V Battery Life Up to 3 years (standby) Operating Temperature -10 °C to 55 °C Operating Humidity 10% to 90% Ingress Protection IP66 Dimensions Ø38 × 12 mm Weight 13.5 g Application Portable Why Choose the Hikvision DS-PDEBP2-EG2-WB? Help is one press away wherever the user is, ideal for elderly people, patients and staff Tiny and light, with IP66 protection for everyday wear Accidental press protection and a two-button design reduce false alarms Encrypted, long-range Tri-X wireless and up to 3 years of battery life Downloads ⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF) Warranty: 12-month warranty from the Official Distributor.
14.000 JD
The Hikvision AX PRO Wireless Magnet Shock Detector (DS-PDMCK-EG2-WB(B)) combines a magnetic opening contact with shock and tilt detection in one wireless device for indoor doors and windows. It reports when a door or window is opened, when it is hit or forced, and when its angle changes, giving earlier warning of a break-in attempt. It connects to the AX PRO system over Tri-X two-way wireless at 433 MHz with up to 1 km range in open space and frequency hopping against jamming. Two wired inputs let you add wired detectors to the wireless system, and a single CR123A battery lasts up to 3 years. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Magnetic contact combined with shock and tilt detection Shock detection with 8 sensitivity levels and tilt detection up to 25° Detection gap up to 43 mm 2 wired input extensions supporting NC, NO and impulse count Tri-X two-way wireless at 433 MHz, up to 1 km in open space Frequency hopping against jamming for reliable transmission Front and rear tamper protection Signal strength and environment temperature indicators Fully remote configurable through the app; enrolment by power-up, remote ID or QR code Up to 3 years of battery life (1 × CR123A) Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDMCK-EG2-WB(B) Product Name Wireless Magnet Shock Detector Detection Method Opening contact; shock sensor Detection Gap 43 mm max Sensitivity Shock: 8 levels; tilt: up to 25° Alarm Input NC / NO / impulse count Tamper Protection Front and rear LED Indicator Green (contact), orange (tilt), red (shock), blue (alarm) Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Range (Free Space) 1 km Frequency Hopping Supported Enrolling Method Power-up, remote ID, QR code Battery 1 × CR123A, 3 V Battery Life Up to 3 years (standby) Operating Temperature -10 °C to 55 °C Operating Humidity 10% to 90% Dimensions (W × H × D) Detector: 24 × 104 × 24.4 mm; magnet: 13 × 34.4 × 11.4 mm Weight 60 g Application Indoor Why Choose the Hikvision DS-PDMCK-EG2-WB(B)? Three kinds of protection in one device: opening, shock and tilt Early warning when someone tries to force a door or window before it opens Adds two wired detectors to a wireless AX PRO system Long-range, anti-jamming Tri-X wireless and up to 3 years of battery life Downloads ⬇ Download Datasheet (PDF) Warranty: 12-month warranty from the Official Distributor.
22.000 JD
The Hikvision AX PRO Wireless External Magnetic Contact (DS-PDMCX-E-WB) is an outdoor opening detector for gates, outdoor doors and other access points. Its IP66, UV-stable housing and wide 76 mm detection gap suit places where an indoor contact would not last or where the gap between sensor and magnet is large. It uses Tri-X two-way wireless at 433 MHz with AES-128 encryption, frequency hopping and up to 1 km range in open space. An alarm input (NC, NO or impulse count) adds installation flexibility, and a single CR123A battery lasts up to 5 years. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Outdoor wireless magnetic contact with IP66, UV-stable housing Detection gap up to 76 mm Alarm input supporting NC, NO and impulse count Tri-X two-way wireless at 433 MHz, up to 1 km in open space AES-128 encrypted transmission with frequency hopping against jamming Front and rear tamper protection Signal strength and environment temperature indicators Fully remote configurable through the app; enrolment by power-up, remote ID or QR code Wide operating temperature: -20 °C to 60 °C Up to 5 years of battery life (1 × CR123A) Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDMCX-E-WB Product Name Wireless External Magnetic Contact Detection Method Opening contact Detection Gap 76 mm max Alarm Input NC / NO / impulse count Tamper Protection Front and rear LED Indicator Blue (alarm) Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Security AES-128 encryption Transmission Range (Free Space) 1 km Frequency Hopping Supported Enrolling Method Power-up, remote ID, QR code Battery 1 × CR123A, 3 V Battery Life Up to 5 years (standby) Operating Temperature -20 °C to 60 °C Operating Humidity 10% to 90% Ingress Protection IP66 Dimensions (W × H × D) Sensor: 40.5 × 146 × 40.9 mm; magnetic stick: 30.5 × 146 × 40.9 mm Weight 247 g Application Outdoor Why Choose the Hikvision DS-PDMCX-E-WB? Built for outdoor gates and doors with IP66, UV-stable protection 76 mm detection gap for installations with a wide sensor-to-magnet gap Encrypted, anti-jamming Tri-X wireless with up to 1 km range Up to 5 years of battery life with no alarm cabling Downloads ⬇ Download Datasheet (PDF)⬇ Download Quick Start Guide (PDF) Warranty: 12-month warranty from the Official Distributor.
27.000 JD
The Hikvision AX PRO Wireless PIR AM Curtain Detector (DS-PDC10AM-EG2-WB) creates a narrow 5° curtain of protection across windows, doors, balconies and corridors. It detects up to 10 m when wall-mounted (5 m on the ceiling) with 32 detection zones, and its slim body is designed for window-frame installation. Active IR anti-masking raises an alert if the lens is covered, it supports directional detection, and its IP65 housing allows indoor and outdoor use. It communicates over Tri-X two-way wireless at 433 MHz with AES-128 encryption and up to 1 km range, and runs up to 5 years on two CR123A batteries. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Slim curtain detector designed for window-frame installation 5° curtain angle with 32 detection zones Detection range: 10 m wall-mounted, 5 m ceiling-mounted Active IR anti-masking Directional detection support Pet immunity up to 12 kg (wall mount) Digital temperature compensation, creep zone protection and sealed optics IP65 weather resistance for indoor and outdoor use Tri-X two-way wireless at 433 MHz with AES-128 encryption, up to 1 km in open space, frequency hopping Up to 5 years of battery life (2 × CR123A); L-shaped adapter included Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB Hikvision AX Hybrid PRO panels: through the DS-PM1-RT-HWB 433 MHz Tri-X wireless receiver Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDC10AM-EG2-WB Product Name Wireless PIR AM Curtain Detector Detection Method Passive infrared (PIR) Detection Range Wall mount: 10 m; ceiling mount: 5 m Detection Angle 5° Detection Zones 32 Sensitivity Auto, pet Pet Immunity Wall mount: 12 kg; ceiling mount: none White Light Filter 6500 lux Anti-Masking Supported (active IR) Directional Detection Supported Tamper Protection Front and rear Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Security AES-128 encryption Transmission Range (Free Space) 1 km Battery 2 × CR123A, 3 V Battery Life Up to 5 years (standby; shorter at low temperatures) Operating Temperature -25 °C to 60 °C Ingress Protection IP65 Mounting Wall or ceiling, 2 m to 3.5 m height Dimensions (W × H × D) 29.2 × 134.4 × 39.5 mm Weight 118.5 g Bracket L-shaped adapter included Application Indoor and outdoor Why Choose the Hikvision DS-PDC10AM-EG2-WB? Focused curtain protection for windows, doors and balconies without covering the whole room Anti-masking and IP65 protection for exposed indoor and outdoor locations Pet immunity up to 12 kg when wall-mounted Long-range, encrypted Tri-X wireless with up to 5 years of battery life Downloads ⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF) Warranty: 12-month warranty from the Official Distributor.
29.000 JD
The Hikvision AX PRO Wireless Dual-Tech AM Curtain Detector (DS-PDC10DM-EG2-WB) combines PIR and 24 GHz microwave detection in a slim curtain detector for windows, doors, balconies and corridors. Its narrow 5° curtain reaches 10 m when wall-mounted (5 m on the ceiling) with 32 detection zones. Two detection technologies help reduce false alarms, while active IR anti-masking, directional detection, pet immunity up to 12 kg (wall mount) and an IP65 housing make it suitable for indoor and outdoor use. It communicates over Tri-X two-way wireless at 433 MHz with AES-128 encryption and up to 1 km range, and runs up to 5 years on two CR123A batteries. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Dual technology: PIR + 24 GHz microwave Slim design for window-frame installation 5° curtain angle with 32 detection zones Detection range: 10 m wall-mounted, 5 m ceiling-mounted Active IR anti-masking and directional detection support Pet immunity up to 12 kg (wall mount) Digital temperature compensation, creep zone protection and sealed optics IP65 weather resistance for indoor and outdoor use Tri-X two-way wireless at 433 MHz with AES-128 encryption, up to 1 km in open space, frequency hopping Up to 5 years of battery life (2 × CR123A); L-shaped adapter included Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB Hikvision AX Hybrid PRO panels: through the DS-PM1-RT-HWB 433 MHz Tri-X wireless receiver Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDC10DM-EG2-WB Product Name Wireless Dual-Tech AM Curtain Detector Detection Method Passive infrared + microwave Microwave Frequency 24 GHz (24.15–24.25 GHz) Detection Range Wall mount: 10 m; ceiling mount: 5 m Detection Angle 5° Detection Zones 32 Sensitivity Auto, pet Pet Immunity Wall mount: 12 kg; ceiling mount: none Anti-Masking Supported (active IR) Directional Detection Supported Tamper Protection Front and rear Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Security AES-128 encryption Transmission Range (Free Space) 1 km Battery 2 × CR123A, 3 V Battery Life Up to 5 years (standby; shorter at low temperatures) Operating Temperature -25 °C to 60 °C Ingress Protection IP65 Mounting Wall or ceiling, 2 m to 3.5 m height Dimensions (W × H × D) 29.2 × 134.4 × 39.5 mm Weight 120 g Bracket L-shaped adapter included Application Indoor and outdoor Why Choose the Hikvision DS-PDC10DM-EG2-WB? Two detection technologies in one slim curtain detector for more reliable detection Anti-masking and IP65 protection for exposed indoor and outdoor locations Pet immunity up to 12 kg when wall-mounted Long-range, encrypted Tri-X wireless with up to 5 years of battery life Downloads ⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF) Warranty: 12-month warranty from the Official Distributor.
42.000 JD
The Hikvision AX PRO Wireless PIR-Glass Break Detector (DS-PDPG12P-EG2-WB) combines a PIR motion detector and an acoustic glass break sensor in one wireless device. The PIR covers 12 m at 85.9° with 52 detection zones, and the glass break sensor covers 8 m at 120°. It offers pet immunity up to 30 kg, digital temperature compensation, creep zone protection and sealed optics, and supports the most common glass types. It connects over Tri-X two-way wireless at 433 MHz with up to 1 km range and frequency hopping, and runs up to 4 years on two CR123A batteries. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features 2-in-1: PIR motion and acoustic glass break detection PIR range 12 m / 85.9° with 52 detection zones Glass break range 8 m / 120° with adjustable sensitivity levels Works with float, plate, tempered, wired, laminated, leaded and double glazing (2.4–6.4 mm, 0.3 × 0.3 m to 3 × 3 m) Pet immunity up to 30 kg; PIR sensitivity auto, high or pet Digital temperature compensation, creep zone protection and sealed optics Front and rear tamper protection Tri-X two-way wireless at 433 MHz, up to 1 km in open space, frequency hopping Fully remote configurable through the app; enrolment by power-up, remote ID or QR code Easily replaceable batteries with PCB protection; up to 4 years of battery life (2 × CR123A) Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB Hikvision AX Hybrid PRO panels: through the DS-PM1-RT-HWB 433 MHz Tri-X wireless receiver Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDPG12P-EG2-WB Product Name Wireless PIR-Glass Break Detector Detection Method Passive infrared + acoustic sensor PIR Detection Range 12 m PIR Detection Angle 85.9° Detection Zones 52 PIR Sensitivity Auto, high, pet Pet Immunity 30 kg Glass Break Range 8 m Glass Break Sensitivity Level 2 (0–2 m) to level 6 (7.2–8 m); level 8 for higher sensitivity (not EN50131-2-7-1 compliant) Glass Type Float, plate, tempered, wired, laminated, leaded, double glazing Glass Thickness 2.4 mm to 6.4 mm Glass Size 0.3 × 0.3 m to 3 × 3 m Tamper Protection Front and rear LED Indicator Green (PIR), red (glass break), blue (alarm) Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Range (Free Space) 1 km Battery 2 × CR123A, 3 V Battery Life Up to 4 years (standby) Operating Temperature -10 °C to 55 °C Mounting Wall, 1.8 m to 2.4 m height (optional wall & ceiling bracket) Dimensions (W × H × D) 65.5 × 103 × 48.5 mm Weight 134 g Application Indoor Why Choose the Hikvision DS-PDPG12P-EG2-WB? One device replaces a separate motion detector and glass break detector Protects rooms with large windows, glass doors or shopfronts 30 kg pet immunity for homes with pets Wireless installation with up to 4 years of battery life Downloads ⬇ Download Datasheet (PDF) Warranty: 12-month warranty from the Official Distributor.
35.000 JD
The Hikvision AX PRO Wireless PIR Ceiling Detector (DS-PDCL12-EG2-WB) mounts on the ceiling and watches a full 360° area with a 12 m detection range and 172 detection zones. One detector can cover an open hall, office, shop or reception area from a central position. SEC (Smart Environmental Control) with advanced digital signal processing and 3D optics, plus digital temperature compensation, creep zone protection and sealed optics, supports reliable detection. It connects over Tri-X two-way wireless at 433 MHz with AES-128 encryption and up to 1 km range, and runs up to 5 years on one CR123A battery. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Ceiling-mounted PIR with 360° coverage Detection range 12 m with 172 detection zones SEC (Smart Environmental Control): advanced digital signal processing and 3D optics Digital temperature compensation, creep zone protection and sealed optics Sensitivity: auto or low Front and rear tamper protection; signal strength and environment temperature indicators Tri-X two-way wireless at 433 MHz with AES-128 encryption, up to 1 km in open space Frequency hopping against jamming for reliable transmission Fully remote configurable through the app; enrolment by power-up, remote ID or QR code Easily replaceable battery with PCB protection; up to 5 years of battery life (1 × CR123A) Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB Hikvision AX Hybrid PRO panels: through the DS-PM1-RT-HWB 433 MHz Tri-X wireless receiver Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDCL12-EG2-WB Product Name Wireless PIR Ceiling Detector Detection Method Passive infrared (PIR) Detection Range 12 m Detection Angle 360° Detection Zones 172 Detectable Speed 0.3–2 m/s Sensitivity Auto, low White Light Filter 6500 lux Tamper Protection Front and rear Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Security AES-128 encryption Transmission Range (Free Space) 1 km Frequency Hopping Supported Battery 1 × CR123A, 3 V Battery Life Up to 5 years (standby) Operating Temperature -10 °C to 55 °C Operating Humidity 10% to 90% Mounting Ceiling, 2.4 m to 4 m height Dimensions Ø101.2 × 32.9 mm Weight 109.5 g Application Indoor Why Choose the Hikvision DS-PDCL12-EG2-WB? 360° coverage from a single ceiling position for open rooms 172 detection zones with SEC signal processing and 3D optics Discreet ceiling installation with no alarm cabling Up to 5 years of battery life on one CR123A battery Downloads ⬇ Download Datasheet (PDF)⬇ Download Quick Start Guide (PDF) Warranty: 12-month warranty from the Official Distributor.
18.000 JD
The Hikvision AX PRO Wireless Dual-Tech Detector (DS-PDD12P-EG2-WB) combines PIR and 24 GHz microwave detection for reliable indoor intrusion detection. It covers 12 m at 85.9° with 52 detection zones and offers pet immunity up to 30 kg. 3D optics with creep zone protection give full coverage without dead angles, and the 24 GHz microwave is designed to prevent wall penetration. It connects over Tri-X two-way wireless at 433 MHz with up to 1.2 km range in open space and frequency hopping, and runs up to 5 years on two CR123A batteries. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Dual technology: PIR + 24 GHz microwave Detection range 12 m / 85.9° with 52 detection zones 3D optics with creep zone protection for full coverage without dead angles 24 GHz microwave designed to prevent wall penetration Pet immunity up to 30 kg; sensitivity high, auto or pet Digital temperature compensation and sealed optics Front and rear tamper protection; signal strength and environment temperature indicators Tri-X two-way wireless at 433 MHz, up to 1.2 km in open space, frequency hopping Fully remote configurable through the app; enrolment by power-up, remote ID or QR code Easily replaceable batteries with PCB protection; up to 5 years of battery life (2 × CR123A) Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB Hikvision AX Hybrid PRO panels: through the DS-PM1-RT-HWB 433 MHz Tri-X wireless receiver Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDD12P-EG2-WB Product Name Wireless Dual-Tech Detector Detection Method Passive infrared + microwave Detection Range 12 m Detection Angle 85.9° Detection Zones 52 Detectable Speed 0.3–2 m/s Sensitivity High, auto, pet Pet Immunity 30 kg Microwave Frequency 24 GHz (24.15–24.25 GHz) White Light Filter 6500 lux Tamper Protection Front and rear LED Indicator Green (PIR), red (microwave), blue (alarm) Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Range (Free Space) 1.2 km Frequency Hopping Supported Battery 2 × CR123A, 3 V Battery Life Up to 5 years (standby) Operating Temperature -10 °C to 55 °C Mounting Wall, 1.8 m to 2.4 m height (optional wall & ceiling bracket) Dimensions (W × H × D) 65.5 × 103 × 48.5 mm Weight 141 g Application Indoor Why Choose the Hikvision DS-PDD12P-EG2-WB? Two detection technologies for more reliable detection than a PIR-only detector 30 kg pet immunity for homes with pets 24 GHz microwave designed not to detect through walls Long 1.2 km wireless range and up to 5 years of battery life Downloads ⬇ Download Datasheet (PDF) Warranty: 12-month warranty from the Official Distributor.
49.000 JD
The Hikvision AX PRO Wireless Triple Signal Detector (DS-PDTT15AM-LM-WB) is an outdoor detector for gardens, entrances, driveways and building perimeters. It uses two PIR sensors and a 24 GHz microwave with Tri-Signal logic, covering 15 m with a 90° angle that can be adjusted across 180°. Active IR anti-masking, anti-sway analytics, pet immunity up to 40 kg, a 10,000 lux white light filter and an IP65 housing suit it to outdoor use. It connects over Tri-X two-way wireless at 433 MHz with AES-128 encryption and up to 1 km range, and runs up to 5 years on five CR123A batteries. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Triple-signal detection: two PIR sensors + 24 GHz microwave with Tri-Signal logic Detection range 15 m with 92 detection zones 90° coverage adjustable across 180°; adaptable coverage with pattern mask included Active IR anti-masking Anti-sway analytics Pet immunity up to 40 kg White light filter up to 10,000 lux; digital temperature compensation and sealed optics IP65 weather resistance, -25 °C to 60 °C Tri-X two-way wireless at 433 MHz with AES-128 encryption, up to 1 km in open space, frequency hopping Up to 5 years of battery life (5 × CR123A) Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDTT15AM-LM-WB Product Name Wireless Triple Signal Detector Detection Method Dual PIR + microwave (Tri-Signal logic) Detection Range 15 m Detection Angle 90° @ 180° adjustable Detection Zones 92 Sensitivity Auto, low Pet Immunity 40 kg Microwave Frequency 24 GHz (24.15–24.25 GHz) White Light Filter 10,000 lux Anti-Masking Supported (active IR) Anti-Sway Analytics Supported Tamper Protection Front and rear Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Security AES-128 encryption Transmission Range (Free Space) 1 km Battery 5 × CR123A, 3 V Battery Life Up to 5 years (standby; shorter at low temperatures) Operating Temperature -25 °C to 60 °C Ingress Protection IP65 Mounting Wall, 0.8 m to 1.2 m height Dimensions (W × H × D) 75 × 202 × 73 mm Weight 600 g Application Outdoor Why Choose the Hikvision DS-PDTT15AM-LM-WB? Tri-Signal logic with two PIR sensors and microwave for outdoor perimeter protection Anti-masking and anti-sway analytics for exposed outdoor locations 40 kg pet immunity and adjustable 90° @ 180° coverage Wireless installation with up to 5 years of battery life Downloads ⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF) Warranty: 12-month warranty from the Official Distributor.
100.000 JD
The Hikvision AX PRO Wireless Temperature Detector (DS-PDTPH-E-WB) adds temperature monitoring to your AX PRO alarm system. On its own it measures -10 °C to 55 °C; with the included external probe the range extends to -35 °C to 99 °C, for places such as server rooms, fridges or freezers. A big 2.7-inch screen shows the reading on the device, and its modular design suits multiple applications. It connects over Tri-X two-way wireless at 433 MHz with AES-128 encryption, frequency hopping and up to 800 m range in open space, and runs up to 2 years on two AAA batteries. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Wireless temperature detector for the AX PRO system Built-in sensor range: -10 °C to 55 °C Included external probe: -35 °C to 99 °C Big 2.7-inch on-screen display Modular design for multiple applications Front and rear tamper protection; signal strength indicator Tri-X two-way wireless at 433 MHz with AES-128 encryption, up to 800 m in open space Frequency hopping against jamming for reliable transmission Fully remote configurable through the app; enrolment by power-up, remote ID or QR code Up to 2 years of battery life (2 × AAA) Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB Hikvision AX Hybrid PRO panels: through the DS-PM1-RT-HWB 433 MHz Tri-X wireless receiver Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDTPH-E-WB Product Name Wireless Temperature Detector Detection Method Temperature sensor Measuring Range -10 °C to 55 °C (standalone); -35 °C to 99 °C (with included probe) Display 2.7-inch screen Tamper Protection Front and rear Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Security AES-128 encryption Transmission Range (Free Space) 800 m Frequency Hopping Supported Enrolling Method Power-up, remote ID, QR code Battery 2 × AAA, 3 V Battery Life Up to 2 years (standby) Operating Temperature -10 °C to 55 °C Operating Humidity 10% to 90% Mounting Wall Dimensions (W × H × D) 62.6 × 62.6 × 18 mm Weight 73.5 g Application Indoor; standalone or with the included probe Why Choose the Hikvision DS-PDTPH-E-WB? Adds temperature monitoring to the same system that protects against intrusion External probe for fridges, freezers and other places outside the detector's own range Clear 2.7-inch screen for checking the reading on site Wireless installation with up to 2 years of battery life Downloads ⬇ Download Datasheet (PDF) Warranty: 12-month warranty from the Official Distributor.
29.000 JD
The Hikvision AX PRO Wireless Water Leak Detector (DS-PDWL-E-WB) gives early warning of water leaks as part of a Hikvision AX PRO wireless alarm system. It comes with an external water probe, so the probe sits at the likely leak point while the detector itself is mounted in a convenient spot nearby. The IP66 housing suits damp areas, and Tri-X two-way wireless at 433 MHz reaches up to 1 km in open space, with frequency hopping against jamming. One CR2450 battery lasts up to 3 years in standby. Note: this is the 433 MHz (-WB) version. It needs a 433 MHz AX PRO hub or an AX Hybrid PRO panel with the DS-PM1-RT-HWB receiver (see "Works With" below) and does not pair with 868 MHz (-WE) devices or hubs. Key Features Early warning of water leaks, with an external probe included IP66 water-proof design for many kinds of installation Tri-X two-way wireless at 433 MHz, up to 1 km range in open space Frequency hopping against jamming and secured transmission Front and rear tamper protection Blue alarm LED, signal strength indicator and environment temperature indicator Up to 3 years of battery life on one CR2450 battery Easy enrollment by power-up, remote ID or QR code Fully configurable remotely through the app Compact 62.4 × 62.4 × 14.6 mm body for wall or surface mounting Works With Hikvision AX PRO hubs (433 MHz): DS-PWA96-KIT-WB and DS-PWA64-KIT-WB alarm kits AX Hybrid PRO panels: through the DS-PM1-RT-HWB 433 MHz Tri-X wireless receiver Longer distances: DS-PR1-WB 433 MHz wireless repeater Also on the same AX PRO system: DS-PS1-E-WB outdoor siren, DS-PK1-E-WB and DS-PK1-LT-WB keypads Technical Specifications Specification Details Model DS-PDWL-E-WB Product Name Wireless Water Leak Detector System Hikvision AX PRO (Tri-X Wireless) Transmission Frequency 433 MHz Transmission Method Two-way RF wireless Transmission Range 1 km (free space) Frequency Hopping Supported Transmission Security Supported Enrollment Power-up, remote ID, QR code Tamper Protection Front and rear LED Indicator Blue (alarm) Other Indicators Signal strength, environment temperature Power Supply 3 V battery (1 × CR2450) Battery Life Up to 3 years (standby time) Application Indoor, standalone or with the included probe Ingress Protection IP66 Operating Temperature -10 °C to 55 °C Storage Temperature -20 °C to 60 °C Operating Humidity 10% to 90% Mounting Wall, surface Dimensions 62.4 × 62.4 × 14.6 mm Weight 85.5 g Why Choose the Hikvision DS-PDWL-E-WB? Catches leaks early, before water damage spreads The external probe sits where leaks start, while the detector stays mounted out of the way Wireless with up to 3 years of battery life, so there is no cabling to run Joins the same AX PRO system as your intrusion detectors, keypads and sirens Downloads ⬇ Download Datasheet (PDF)⬇ Download Quick Start Guide (PDF) Warranty: 12-month warranty from the Official Distributor.
28.000 JD
The Hikvision AX PRO Wireless LED Keypad (DS-PK1-E-WB) is a battery-powered touch keypad for the Hikvision AX PRO wireless alarm system. Use it to arm (Stay or Away), disarm and clear alarms for a single area or for all areas, while LEDs show the programmed areas. It has full touch keys with LED backlight and one-push Fire, Panic and Medical alarms, each selectable as silent or audible. The keypad links to the hub over 433 MHz two-way wireless with AES-128 encryption and frequency hopping, reaches up to 900 m in open areas, and runs on four AA batteries for up to 2 years. Note: this is the 433 MHz (-WB) version. It needs a 433 MHz AX PRO hub (see "Works With" below) and does not pair with 868 MHz (-WE) devices or hubs. Key Features Stay and Away arming, disarming and alarm clearing for specified areas or all areas LEDs show the programmed areas One-push Fire, Panic and Medical alarms, silent or audible Output control from the keypad Full touch keys with LED backlight 433 MHz two-way wireless with AES-128 encryption Frequency hopping against jamming for reliable transmission Up to 900 m wireless range in open areas Up to 2 years of battery life on four easy-to-replace AA batteries Fully configurable remotely through the app, with multiple enrollment methods Works With Hikvision AX PRO hubs (433 MHz): DS-PWA96-KIT-WB and DS-PWA64-KIT-WB alarm kits Longer distances: DS-PR1-WB 433 MHz wireless repeater Also on the same AX PRO system: DS-PKF1-WB keyfob and DS-PS1-E-WB outdoor siren Technical Specifications Specification Details Model DS-PK1-E-WB Product Name Wireless LED Keypad System Hikvision AX PRO Keys Full touch keys with LED backlight Arming Functions Stay / Away arm, disarm, alarm clearing (specified area or all areas) Emergency Alarms One-push Fire, Panic, Medical (silent or audible) Output Control Supported RF Frequency 433 MHz RF Modulation 2GFSK RF Distance 900 m (open area) Encryption AES-128 Frequency Hopping Supported Power Supply 4 × AA batteries Battery Life Up to 2 years (standby time) Installation Screw mounting Operating Temperature -10 °C to +55 °C Operating Humidity 10% to 90% (non-condensing) Dimensions 140 × 86 × 22 mm Weight 151 g (without batteries) Why Choose the Hikvision DS-PK1-E-WB? A simple control point by the door, so nobody needs a phone to arm or disarm One-push emergency alarms for fire, panic and medical situations Encrypted two-way wireless with long range and no cables to run Up to 2 years between battery changes, and the batteries are easy to replace Downloads ⬇ Download User Manual (PDF) Warranty: 12-month warranty from the Official Distributor.
38.000 JD
The Hikvision AX PRO Wireless LCD Keypad (DS-PK1-LT-WB) is a wall-mounted keypad with an LCD screen and built-in tag reader for the Hikvision AX PRO wireless alarm system. The screen and LEDs show the system status, and you can configure the system directly from the LCD. Users can Stay arm, Away arm and disarm, trigger a silent alarm and control outputs, and one-push Fire, Panic and Medical alarms are built in. It uses Tri-X 433 MHz two-way wireless with up to 800 m range in open areas, and runs on four CR123 batteries for up to 2 years. Note: this is the 433 MHz (-WB) version. It needs a 433 MHz AX PRO hub (see "Works With" below) and does not pair with 868 MHz (-WE) devices or hubs. Key Features LCD screen and LEDs show the system status Built-in tag reader System configuration through the LCD screen Stay / Away arming, disarming, silent alarm and output control One-push Fire, Panic and Medical alarms Full touch keys with LED backlight Front and rear tamper protection and built-in buzzer Tri-X 433 MHz two-way wireless, up to 800 m in open areas Up to 2 years of battery life on four CR123 batteries Fully configurable remotely through the app Works With Hikvision AX PRO hubs (433 MHz): DS-PWA96-KIT-WB and DS-PWA64-KIT-WB alarm kits Longer distances: DS-PR1-WB 433 MHz wireless repeater Also on the same AX PRO system: DS-PKF1-WB keyfob and DS-PS1-E-WB outdoor siren Technical Specifications Specification Details Model DS-PK1-LT-WB Product Name Wireless LCD Keypad System Hikvision AX PRO (Tri-X Wireless) Display LCD screen with LED indicators Tag Reader Built-in Keys Number keys 0–9; function keys *, #, Query, Away Arm, Stay Arm, Disarm, Output, Project, Right, Left LED Indicators Fault (orange), Enrollment/Signal (red/green), Arm (blue), Disarm (green), Alarm (red) Buzzer Supported Tamper Protection Front and rear RF Frequency 433 MHz RF Modulation 2GFSK RF Distance 800 m (open area) Power Supply 4 × CR123 batteries (3 V) Battery Life Up to 2 years (standby time) Power Consumption Quiescent 80 µA; max 300 mA Installation Wall mounting Operating Temperature -10 °C to +55 °C Operating Humidity 10% to 90% Color White Dimensions 174.63 × 109.62 × 25.25 mm Weight 348 g with batteries; 282 g without batteries Why Choose the Hikvision DS-PK1-LT-WB? The LCD shows the system status as text, not only as LEDs Quick arming and disarming with a tag instead of typing a code Configure the system right at the keypad Wireless, with long battery life and front and rear tamper protection Downloads ⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF) Warranty: 12-month warranty from the Official Distributor.
55.000 JD
The Hikvision DS-PM1-RT-HWB is a 433 MHz Tri-X wireless receiver for the Hikvision AX Hybrid PRO alarm system. It connects to the control panel over the Speed-X bus and adds wireless devices to the wired system: up to 32 wireless detectors, 8 wireless indoor sounders and 4 wireless outdoor sounders. The wireless transmission distance reaches up to 1,300 m in open space, and the link is protected by frequency hopping and 128-bit AES encryption. Green and orange LEDs show power/find-me and alarm/fault status. Note: this is the 433 MHz version. It works only with 433 MHz (-WB) Tri-X devices; for 868 MHz devices choose the DS-PM1-RT-HWE. Key Features 433 MHz Tri-X wireless receiver for AX Hybrid PRO Up to 32 wireless detectors (portable emergency button not included) Up to 8 wireless indoor sounders and 4 wireless outdoor sounders Wireless transmission distance up to 1,300 m in open space Frequency hopping and 128-bit AES encryption 1 Speed-X bus connection to the control panel LED indicators: green for power/find me, orange for alarm/fault 9–24 VDC power input Works With Hikvision AX Hybrid PRO control panels: DS-PHA48-EP(B) (48 zones), DS-PHA64-LP(B) (64 zones) and the DS-PHA64-KIT-WB(B) kit, over the Speed-X bus 433 MHz Tri-X devices from the official compatibility list: DS-PDP15P-EG2-WB, DS-PDD12P-EG2-WB, DS-PDCL12-EG2-WB, DS-PDC10AM-EG2-WB, DS-PDPG12P-EG2-WB, DS-PDMCK-EG2-WB(B), DS-PDWL-E-WB, DS-PDTPH-E-WB, DS-PDEB1-EG2-WB, DS-PDEBP1-EG2-WB, DS-PS1-E-WB Technical Specifications Specification Details Model DS-PM1-RT-HWB Product Name Tri-X Wireless Receiver Compatible System Hikvision AX Hybrid PRO RF Frequency 433 MHz Wireless Technology Tri-X Transmission Distance Up to 1,300 m (open space) Wireless Security Frequency hopping, 128-bit AES encryption Wireless Detectors Up to 32 (portable emergency button not included) Wireless Sounders Up to 8 indoor and 4 outdoor Bus 1 × Speed-X LED Indicators Green: power/find me; orange: alarm/fault Power Supply 9–24 VDC (typical 12 VDC) Power Consumption Max. 100 mA @ 12 VDC; quiescent 40 mA @ 12 VDC Operating Temperature -10°C to 40°C Operating Humidity 10% to 90% Housing Material Plastic Dimensions (W × H × D) 110 × 155 × 32 mm Weight 233 g Why Choose the Hikvision DS-PM1-RT-HWB? Adds wireless detectors and sounders to a wired AX Hybrid PRO system without running new cables Long 1,300 m open-space range with encrypted, frequency-hopping links Up to 32 wireless detectors per receiver Simple Speed-X bus connection to the panel Downloads ⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF) Warranty: 12-month warranty from the Official Distributor.
35.000 JD
You have seen 24 out of 26 products
Shop wireless alarm systems in Jordan for homes, villas, offices, shops, and businesses. Explore smart alarm panels, motion detectors, door and window sensors, sirens, emergency buttons, keyfobs, and other security accessories from trusted brands such as Hikvision.
Easy installation, reliable wireless connectivity, mobile app control, and smart security solutions for complete property protection.
