The Hikvision AX Hybrid PRO DS-PHA64-LP(B) is a hybrid intrusion alarm control panel that combines the reliability of wired detectors with the flexibility of wireless devices. It handles up to 64 zones and 64 outputs in 32 areas: 8 zones and 4 outputs are on board, and up to 56 wired or wireless zones and 60 outputs are added through expansion.
Its Speed-X bus connects wired keypads, expanders and up to 8 wired PIR-camera detectors, and the panel supports 4-channel IP camera video verification with short alarm clips for checking an alarm by email or in the mobile client. Alarm events are reported over LAN, Wi-Fi, PSTN, GPRS or 3G/4G on a main and a backup path, and users arm and disarm by keypad, keyfob, tag, SMS, iVMS-4200 or the mobile client.
Note: the 12 V 7 Ah lead-acid backup battery is not included. GPRS or 3G/4G communication needs an optional communication module, and wireless devices are added through a Tri-X receiver of the matching frequency (see "Works With" below).
Key Features
Hybrid system: 8 on-board zones plus up to 56 expandable wired or wireless zones (64 in total)
4 on-board outputs (2 NO/NC relay outputs and 2 PGM outputs), expandable to 64 outputs
32 areas and up to 64 users (1 installer, 1 administrator, 62 operators)
1 Speed-X bus for keypads, expanders and up to 8 wired PIR-camera detectors
4-channel on-board IP camera video verification with alarm clips (5 s pre-alarm + 2 s post-alarm, or 2 s + 5 s)
Dual-path alarm reporting over LAN, Wi-Fi, PSTN, GPRS or 3G/4G, with main and backup channels and configurable priority
Arming and disarming by keypad, keyfob, tag, SMS, iVMS-4200 or the mobile client
Push alarm notifications through messages and Hik-Connect
Alarm receiving centre protocols DC-09 (ADM-CID / SIA-DCS), CSV-IP and ISUP 5.0, plus ISAPI and Cloud P2P
Built-in 100–240 VAC power supply with backup battery support (up to 36 hours)
Works With
Keypad: DS-PK1-LRT-HWB wired LCD keypad with tag reader (up to 8 keypads)
Wireless devices: through the DS-PM1-RT-HWB (433 MHz, for -WB devices) or DS-PM1-RT-HWE (868 MHz, for -WE devices) Tri-X receiver; pair only devices of the receiver's frequency
Speed-X expanders: DS-PM1-I8O2-H 8-zone input expander, DS-PM1-O4L-H and DS-PM1-O4H-H 4-way relay expanders
Visual verification: DS-PDPC12P-EG2 wired PIR-camera detector (up to 8)
Communication modules: DS-PM2-P (PSTN), DS-PM2-G (GPRS), DS-PM2-S(EU) and DS-PM2-S(AU) (3G/4G)
Wired sounder: DS-PS102X external sounder with strobe light, driven by the bell output
Technical Specifications
Specification
Details
Model
DS-PHA64-LP(B)
Product Name
AX Hybrid PRO Control Panel
Zones
64 (8 on-board; up to 8 wired PIR-camera detectors)
Alarm Outputs
64 (including 2 on-board relay outputs and 2 on-board I/O outputs)
Areas
32
Users
Installer 1, Administrator 1, Operator 62
Keypads / Keyfobs / Tags
8 / 64 / 64
Wireless Sounders
16
Bus
1 × Speed-X bus
Video Verification
4 on-board video clip channels
Network
1 × RJ45 10/100 Mbps Ethernet; Wi-Fi 802.11b/g/n (2.4 GHz)
Cellular
GPRS or 3G/4G, optional
SMS Notification
Supported (with GPRS/3G/4G module)
Protocols
DC-09 (ADM-CID / SIA-DCS), CSV-IP, ISUP 5.0, ISAPI, Cloud P2P
Programming
Web, iVMS-4200, Hik-ProConnect, keypad
EOL Resistance
1K, 2.2K, 4.7K, 5.6K, 6.8K, 8.2K
Power Output
Bell: max 12 V 1.2 A; AUX: max 12 V 1.5 A; Bell + AUX: max 12 V 2.1 A
Power Input
100–240 VAC (on-board transformer)
Backup Battery
12 V 7 Ah lead-acid (not included), up to 36 hours
Tamper Protection
Removal from mounting and front cover open
Operating Temperature
-10 °C to 40 °C
Operating Humidity
10% to 90%
Housing
Plastic, white
Dimensions
261 × 199 × 86.4 mm
Weight
997 g
Why Choose the Hikvision DS-PHA64-LP(B)?
Wired reliability and wireless flexibility in one control panel
Visual verification with PIR-camera detectors and IP cameras shows what triggered an alarm before anyone responds
Main and backup reporting paths help alarm events get through
Grows from 8 on-board zones to 64 zones in 32 areas as the site needs
Downloads
⬇ Download Datasheet (PDF)
Warranty: 12-month warranty from the Official Distributor.
The Hikvision AX Hybrid PRO Kit DS-PHA64-KIT-WB(B) is a 433 MHz starter kit for the AX Hybrid PRO hybrid alarm system. It combines the DS-PHA64-LP(B) control panel with a wired LCD keypad with tag reader, a magnetic contact, two PIR detectors, a wireless keyfob and two tags, so you can start a wired-and-wireless alarm system from one box.
The panel handles up to 64 zones and 64 outputs in 32 areas (8 zones and 4 outputs on board), supports up to 8 wired PIR-camera detectors on its Speed-X bus and 4-channel IP camera video verification. It reports alarm events over LAN, Wi-Fi, PSTN, GPRS or 3G/4G on a main and a backup path, and users arm and disarm by keypad, keyfob, tag, SMS, iVMS-4200 or the mobile client.
Note: the 12 V 7 Ah lead-acid backup battery is not included. This is the 433 MHz (-WB) kit: add more wireless detectors and sirens through the DS-PM1-RT-HWB 433 MHz Tri-X receiver and choose -WB devices only (see "Works With" below).
Key Features
Complete AX Hybrid PRO starter kit: control panel, wired LCD keypad with tag reader, magnetic contact, 2 PIR detectors, keyfob and 2 tags
433 MHz (-WB) kit version
Up to 64 zones (8 on board) and 64 outputs (4 on board) in 32 areas, for up to 64 users
1 Speed-X bus with up to 8 wired PIR-camera detectors
4-channel on-board IP camera video verification with alarm clips
Dual-path alarm reporting over LAN, Wi-Fi, PSTN, GPRS or 3G/4G with configurable priority
Arming by keypad, keyfob, tag, SMS, iVMS-4200 or the mobile client, with push notifications through Hik-Connect
Room for up to 8 keypads, 64 keyfobs, 64 tags and 16 wireless sounders
Built-in 100–240 VAC power supply with backup battery support (up to 36 hours)
Works With
Wireless devices (433 MHz): DS-PM1-RT-HWB Tri-X receiver for AX PRO -WB detectors and sirens; extra DS-PKF1-WB keyfobs
Extra keypads: DS-PK1-LRT-HWB wired LCD keypad with tag reader
Speed-X expanders: DS-PM1-I8O2-H 8-zone input expander, DS-PM1-O4L-H and DS-PM1-O4H-H 4-way relay expanders
Visual verification: DS-PDPC12P-EG2 wired PIR-camera detector (up to 8)
Communication modules: DS-PM2-P (PSTN), DS-PM2-G (GPRS), DS-PM2-S(EU) and DS-PM2-S(AU) (3G/4G)
Wired sounder: DS-PS102X external sounder with strobe light, driven by the bell output
Technical Specifications
Specification
Details
Model
DS-PHA64-KIT-WB(B)
Kit Version
433 MHz (-WB)
Control Panel
DS-PHA64-LP(B)
Keypad
DS-PK1-LRT-HWB wired LCD keypad with tag reader
Zones
64 (8 on-board; up to 8 wired PIR-camera detectors)
Alarm Outputs
64 (including 2 on-board relay outputs and 2 on-board I/O outputs)
Areas
32
Users
Installer 1, Administrator 1, Operator 62
Keypads / Keyfobs / Tags
8 / 64 / 64
Wireless Sounders
16
Bus
1 × Speed-X bus
Video Verification
4 on-board video clip channels
Network
1 × RJ45 10/100 Mbps Ethernet; Wi-Fi 802.11b/g/n (2.4 GHz)
Cellular
GPRS or 3G/4G, optional
SMS Notification
Supported (with GPRS/3G/4G module)
Protocols
DC-09 (ADM-CID / SIA-DCS), CSV-IP, ISUP 5.0, ISAPI, Cloud P2P
Programming
Web, iVMS-4200, Hik-Partner Pro, keypad
Power Output
Bell: max 12 V 1.2 A; AUX: max 12 V 1.5 A
Power Input
100–240 VAC (on-board transformer)
Backup Battery
12 V 7 Ah lead-acid (not included), up to 36 hours
Tamper Protection
Removal from mounting and front cover open
Operating Temperature
-10 °C to 40 °C (control panel)
Panel Dimensions
261 × 199 × 86.4 mm
Panel Weight
997 g
What's in the Box
1 × DS-PHA64-LP(B) AX Hybrid PRO control panel
1 × DS-PK1-LRT-HWB wired LCD keypad with tag reader
1 × DS-PD1-MC-WS magnetic contact
2 × DS-PDP18-EG2(B) PIR detectors
1 × DS-PKF1-WB wireless keyfob
2 × DS-PT-M1 tags
Why Choose the Hikvision DS-PHA64-KIT-WB(B)?
Everything needed to start in one box, built around a panel that grows to 64 zones
Mix wired detectors with 433 MHz wireless devices where cabling is difficult
Visual alarm verification with PIR-camera detectors and IP cameras
Main and backup reporting paths help alarm events get through
Downloads
⬇ Download Control Panel Datasheet (PDF)⬇ Download Keypad User Manual (PDF)
Warranty: 12-month warranty from the Official Distributor.
The Hikvision AX Hybrid PRO Wired LCD Keypad (DS-PK1-LRT-HWB) is a wired keypad with an LCD screen and a built-in tag reader for Hikvision AX Hybrid PRO control panels. It connects over the Speed-X bus and lets users Away arm, Stay arm, disarm, query the system and control alarm outputs, with one-touch arming that needs no password.
Dedicated Fire, Panic and Medical alarm keys are built in, and the screen can show your company name, phone number and the time. The keypad also supports up to 64 keyfobs at 433 MHz and has 2 on-board alarm inputs and 1 alarm output for wiring nearby devices straight to the keypad.
Note: this is a wired keypad for AX Hybrid PRO control panels (see "Works With" below). It runs on 12 VDC (10.2–14.4 VDC), and its keyfob receiver works at 433 MHz, so use 433 MHz (-WB) keyfobs such as the DS-PKF1-WB.
Key Features
LCD screen with 4 status indicators and white key backlight
Built-in tag reader
One-touch arming without a password
Away Arm, Stay Arm, Disarm, Query and Alarm Output keys
Fire, Panic and Medical alarm keys
Shows the company name, phone number and time
Supports up to 64 keyfobs at 433 MHz
2 on-board alarm inputs and 1 on-board alarm output
Speed-X bus connection to the control panel
Built-in buzzer and back-cover tamper switch
Works With
AX Hybrid PRO control panels: DS-PHA48-EP(B) and DS-PHA64-LP(B), also as an extra keypad for the DS-PHA64-KIT-WB(B) kit
Keyfobs (433 MHz): DS-PKF1-WB
Technical Specifications
Specification
Details
Model
DS-PK1-LRT-HWB
Product Name
Wired LCD Keypad
System
Hikvision AX Hybrid PRO
Display
LCD screen
Tag Reader
1 built-in tag reader
Function Keys
8: Query, Away Arm, Stay Arm, Disarm, Alarm Output, Project, Left, Right
Numeric Keys
0–9, *, #
Bus
1 × Speed-X bus (RS-485)
Alarm Inputs
2 on-board
Alarm Output
1 on-board
RF Frequency
433 MHz
Keyfobs
Up to 64
Indicators
Power (green), Fault (orange), Armed (blue), Alarm (red); white key backlight
Buzzer
1 on-board
Tamper Protection
Back-cover tamper switch
Serial Port
1 × TTL
Power Supply
10.2–14.4 VDC (12 VDC typical)
Power Consumption
Max 150 mA, quiescent 72 mA @ 12 VDC
Operating Temperature
-10 °C to +55 °C
Operating Humidity
10% to 90%
Color
White
Dimensions
150 × 115 × 28 mm
Why Choose the Hikvision DS-PK1-LRT-HWB?
One control point with screen, tag reader and keyfob support
Wired to the panel bus, so there are no keypad batteries to change
Extra inputs and an output at the keypad save cable runs back to the panel
Dedicated keys for fire, panic and medical emergencies
Downloads
⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF)
Warranty: 12-month warranty from the Official Distributor.
The Hikvision DS-PM2-P PSTN Communication Module adds a landline (PSTN) communication path to Hikvision AX Hybrid PRO control panels. The panel can then report alarm events over the telephone line to an alarm receiving centre using the Contact ID protocol (SIA DC-05-1999.09).
AX Hybrid PRO panels report alarm events on a main and a backup path with configurable priority, so the PSTN line can serve as either path. The module draws only 0.36 W and measures 44.10 × 74.06 mm.
Note: for AX Hybrid PRO control panels (see "Works With" below). A working PSTN telephone line is required.
Key Features
Adds PSTN (landline) alarm communication to AX Hybrid PRO control panels
Contact ID (SIA DC-05-1999.09) reporting to alarm receiving centres
Works as a main or backup path in the panel's dual-path communication
Low power consumption: 0.36 W in total
Compact 44.10 × 74.06 mm board, 43.5 g
Operating range -10 °C to 40 °C, 10% to 90% humidity
Works With
AX Hybrid PRO control panels: DS-PHA48-EP(B), DS-PHA64-LP(B) and the DS-PHA64-KIT-WB(B) kit
Technical Specifications
Specification
Details
Model
DS-PM2-P
Product Name
PSTN Communication Module
System
Hikvision AX Hybrid PRO
Communication
PSTN (landline)
ARC Protocol
Contact ID (SIA DC-05-1999.09)
Power Consumption
5 V 0.21 W, 3.3 V 0.15 W (0.36 W total)
Operating Temperature
-10 °C to 40 °C
Operating Humidity
10% to 90%
Dimensions (W × H)
44.10 × 74.06 mm
Weight
43.5 g
Why Choose the Hikvision DS-PM2-P?
A landline reporting path for sites that already have a telephone line
Standard Contact ID reporting for alarm receiving centres
Can act as the backup route when the main path fails
Very low power draw
Warranty: 12-month warranty from the Official Distributor.
The Hikvision DS-PM2-G GPRS Communication Module adds GPRS cellular communication to Hikvision AX Hybrid PRO control panels. With a SIM card in its slot, the panel can report alarm events over the mobile network and send SMS notifications.
AX Hybrid PRO panels report alarm events on a main and a backup path with configurable priority, so the cellular link can be the main path where there is no wired network, or the backup to LAN or PSTN. The module weighs just 17 g and measures 61.87 × 88.18 mm.
Note: for AX Hybrid PRO control panels (see "Works With" below). A SIM card from your mobile operator is required.
Key Features
Adds GPRS cellular alarm communication to AX Hybrid PRO control panels
1 SIM card slot
Enables SMS notifications from the panel
Works as a main or backup path in the panel's dual-path communication
An alarm path that does not depend on the site's wired network or phone line
Compact 61.87 × 88.18 mm board, 17 g
Operating temperature -10 °C to +40 °C
Works With
AX Hybrid PRO control panels: DS-PHA48-EP(B), DS-PHA64-LP(B) and the DS-PHA64-KIT-WB(B) kit
Technical Specifications
Specification
Details
Model
DS-PM2-G
Product Name
GPRS Communication Module
System
Hikvision AX Hybrid PRO
Cellular Network
GPRS
SIM Slot
1
SMS Notification
Supported (through the control panel)
Operating Temperature
-10 °C to +40 °C
Dimensions (W × H)
61.87 × 88.18 mm
Weight
17 g
Why Choose the Hikvision DS-PM2-G?
Keeps alarms reporting without a wired internet connection or landline
Adds SMS notifications to the panel
Simple add-on for AX Hybrid PRO control panels
Small, light module
Downloads
⬇ Download Datasheet (PDF)
Warranty: 12-month warranty from the Official Distributor.
The Hikvision DS-PM2-S(AU) 3G/4G Communication Module adds 4G LTE cellular communication to Hikvision AX Hybrid PRO control panels. Built on the SIM7600SA-H cellular module, it covers LTE-FDD bands B1/B2/B3/B4/B5/B7/B8/B28/B66 and LTE-TDD band B40.
It has 2 SIM card slots, with one card used at a time. With the module fitted, the panel can report alarm events over the mobile network on a main or backup path and send SMS notifications.
Note: this is the AU-region version. Check that your mobile operator uses one of the listed LTE bands; the DS-PM2-S(EU) version covers FDD-LTE B1/B3/B7/B8/B20 plus 3G and 2G networks.
Key Features
Adds 3G/4G cellular alarm communication to AX Hybrid PRO control panels
SIM7600SA-H cellular module
LTE-FDD bands: B1/B2/B3/B4/B5/B7/B8/B28/B66
LTE-TDD band: B40
2 SIM card slots (one card in use at a time)
Enables SMS notifications from the panel
Works as a main or backup path in the panel's dual-path communication
Compact 62.03 × 88.28 mm board, 28 g
Works With
AX Hybrid PRO control panels: DS-PHA48-EP(B), DS-PHA64-LP(B) and the DS-PHA64-KIT-WB(B) kit
Technical Specifications
Specification
Details
Model
DS-PM2-S(AU)
Product Name
3G/4G Communication Module (AU)
System
Hikvision AX Hybrid PRO
Cellular Module
SIM7600SA-H
LTE-FDD Bands
B1/B2/B3/B4/B5/B7/B8/B28/B66
LTE-TDD Band
B40
SIM Slots
2 (only one card can be used at a time)
SMS Notification
Supported (through the control panel)
Operating Temperature
-10 °C to +40 °C
Dimensions (W × H)
62.03 × 88.28 mm
Weight
28 g
Why Choose the Hikvision DS-PM2-S(AU)?
A 4G LTE reporting path that does not depend on the site's wired network
Two SIM card slots in one module
Wide LTE band list for AU-region networks
Simple add-on for AX Hybrid PRO control panels
Downloads
⬇ Download Datasheet (PDF)
Warranty: 12-month warranty from the Official Distributor.
The Hikvision DS-PM2-S(EU) 3G/4G Communication Module adds cellular communication to Hikvision AX Hybrid PRO control panels with 4G, 3G and 2G support: FDD-LTE B1/B3/B7/B8/B20, dual-band UMTS/HSDPA/HSPA+ B1/B8 and GSM/GPRS/EDGE 900/1800 MHz.
With a SIM card in its slot, the panel can report alarm events over the mobile network on a main or backup path and send SMS notifications. Support for three network generations gives more coverage options at the installation site.
Note: this is the EU-region version. Check that your mobile operator uses the listed bands; the DS-PM2-S(AU) version covers a different set of LTE bands.
Key Features
Adds 3G/4G cellular alarm communication to AX Hybrid PRO control panels
FDD-LTE: B1/B3/B7/B8/B20
Dual-band UMTS/HSDPA/HSPA+: B1/B8
GSM/GPRS/EDGE: 900/1800 MHz
1 SIM card slot
Enables SMS notifications from the panel
Works as a main or backup path in the panel's dual-path communication
Compact 62.03 × 88.28 mm board, 28 g
Works With
AX Hybrid PRO control panels: DS-PHA48-EP(B), DS-PHA64-LP(B) and the DS-PHA64-KIT-WB(B) kit
Technical Specifications
Specification
Details
Model
DS-PM2-S(EU)
Product Name
3G/4G Communication Module (EU)
System
Hikvision AX Hybrid PRO
4G (FDD-LTE)
B1/B3/B7/B8/B20
3G (UMTS/HSDPA/HSPA+)
B1/B8 (dual-band)
2G (GSM/GPRS/EDGE)
900/1800 MHz
SIM Slot
1
SMS Notification
Supported (through the control panel)
Operating Temperature
-10 °C to +40 °C
Dimensions (W × H)
62.03 × 88.28 mm
Weight
28 g
Why Choose the Hikvision DS-PM2-S(EU)?
One module covering 4G, 3G and 2G networks
Reports alarms without depending on the site's wired network or phone line
Adds SMS notifications to the panel
Simple add-on for AX Hybrid PRO control panels
Downloads
⬇ Download Datasheet (PDF)
Warranty: 12-month warranty from the Official Distributor.
The Hikvision DS-PM1-I8O2-H is a wired input expander (cascade type) for the Hikvision AX Hybrid PRO intrusion alarm system. It adds 8 wired alarm zones and 2 I/O outputs to the control panel, so you can connect more wired detectors and contacts without replacing the panel.
The module connects to the control panel over the Speed-X bus and has a second Speed-X port for cascading the next expander. Every zone supports 3EOL wiring with alarm, tamper, masking, fault and short detection, and a dedicated power output feeds the connected wired detectors.
Note: a Hikvision AX Hybrid PRO control panel is required (see "Works With" below).
Key Features
8 on-board wired alarm zones
2 I/O outputs (for connection to a relay module)
3EOL zone wiring: Alarm 1 kΩ, Tamper 1 kΩ, Fault 2.2 kΩ
Zone alarm, tamper, masking, fault and short detection
1 power output for wired detectors (9–12 VDC, max. 500 mA)
2 × Speed-X bus: 1 input to the control panel and 1 output for cascading the next expander
Up to 900 m of bus cable to the control panel
Front and rear tamper protection
LED indicators for power and fault
Wide 11–24 VDC power input
Works With
Hikvision AX Hybrid PRO control panels: DS-PHA48-EP(B) (48 zones), DS-PHA64-LP(B) (64 zones) and the DS-PHA64-KIT-WB(B) kit, over the Speed-X bus
Wired detectors and contacts on its 8 zones, such as DS-PDC10DM-VG3, DS-PDC10AM-VG3, DS-PDC15-EG2(B) and DS-PDC5NC-EG2
Technical Specifications
Specification
Details
Model
DS-PM1-I8O2-H
Product Name
Wired Input Expander (Cascade)
Compatible System
Hikvision AX Hybrid PRO
Alarm Inputs
8 wired zones
Zone Wiring
3EOL (Alarm 1 kΩ / Tamper 1 kΩ / Fault 2.2 kΩ)
I/O Outputs
2 (connect to relay module)
Detector Power Output
1 × 9–12 VDC, max. 500 mA
Bus
2 × Speed-X (1 input for the control panel, 1 output for expander cascading)
Bus Distance
Up to 900 m to the control panel
Tamper Protection
Front and rear
LED Indicators
1 × power, 1 × fault
Power Supply
11–24 VDC (typical 12 VDC)
Power Consumption
Max. 119 mA @ 12 VDC; quiescent 45 mA @ 12 VDC
Operating Temperature
-10°C to 40°C
Operating Humidity
10% to 90%
Housing Material
Plastic
Dimensions (W × H × D)
110 × 155 × 32 mm
Weight
252.5 g
Why Choose the Hikvision DS-PM1-I8O2-H?
Adds 8 wired zones to an AX Hybrid PRO panel without replacing it
3EOL wiring reports alarm, tamper, masking, fault and short on every zone
Long Speed-X bus runs and cascading for larger buildings
Powers the connected wired detectors from its own output
Downloads
⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF)
Warranty: 12-month warranty from the Official Distributor.
The Hikvision DS-PM1-O4L-H is a wired 4-way low-current relay expander for the Hikvision AX Hybrid PRO intrusion alarm system. It adds 4 on-board relays rated 6–30 V and up to 5 A, so the alarm panel can switch external low-voltage devices and circuits.
Powered by Speed-X technology, it has 1 uplink Speed-X port to the control panel and 1 downlink port for the next expander. It also offers a power output of up to 500 mA, a TTL serial port, and front and rear tamper protection.
Note: a Hikvision AX Hybrid PRO control panel is required (see "Works With" below).
Key Features
4 on-board low-current relays, 6–30 V, up to 5 A each
Lets the alarm panel switch external low-voltage devices and circuits
1 power output, 9–12 VDC, max. 500 mA
2 × Speed-X bus: 1 uplink to the control panel, 1 downlink for the next expander
Supports expander cascading
1 TTL serial port
Front and rear tamper protection
LED indicators for power and fault
11–24 VDC power input
Works With
Hikvision AX Hybrid PRO control panels: DS-PHA48-EP(B) (48 zones), DS-PHA64-LP(B) (64 zones) and the DS-PHA64-KIT-WB(B) kit, over the Speed-X bus
Other AX Hybrid PRO expanders: cascade on the Speed-X bus, e.g. DS-PM1-I8O2-H 8-zone input expander
Technical Specifications
Specification
Details
Model
DS-PM1-O4L-H
Product Name
Wired 4-Way Low Current Relay Expander
Compatible System
Hikvision AX Hybrid PRO
Relay Outputs
4 low-current relays
Relay Rating
6–30 V, up to 5 A per relay
Power Output
9–12 VDC, max. 500 mA
Bus
2 × Speed-X (1 uplink to the control panel, 1 downlink for the next expander)
Serial Port
1 × TTL
Tamper Protection
Front and rear
LED Indicators
1 × power, 1 × fault
Power Supply
11–24 VDC (typical 12 VDC)
Power Consumption
Max. 153 mA @ 12 VDC; quiescent 70 mA @ 12 VDC
Operating Temperature
-10°C to 40°C
Operating Humidity
10% to 90%
Housing Material
Plastic
Dimensions (W × H × D)
110 × 155 × 32.5 mm
Weight
285 g
Why Choose the Hikvision DS-PM1-O4L-H?
Lets the AX Hybrid PRO panel control external low-voltage equipment through 4 independent relays
5 A rating on every relay output
Speed-X cascading for larger installations
Need higher loads? The DS-PM1-O4H-H offers relays rated up to 16 A
Downloads
⬇ Download Datasheet (PDF)
Warranty: 12-month warranty from the Official Distributor.
The Hikvision DS-PM1-O4H-H is a wired 4-way power relay expander for the Hikvision AX Hybrid PRO intrusion alarm system. It adds 4 on-board power relays, each handling up to 16 A, so the alarm panel can switch higher-power loads than a low-current relay expander.
Powered by Speed-X technology, it has 1 uplink Speed-X port to the control panel and 1 downlink port for the next expander. It also has a TTL serial port and front and rear tamper protection, and runs on 9–24 VDC.
Note: a Hikvision AX Hybrid PRO control panel is required (see "Works With" below).
Key Features
4 on-board power relays, each handling up to 16 A
Higher switching capacity than the low-current DS-PM1-O4L-H
2 × Speed-X bus: 1 uplink to the control panel, 1 downlink for the next expander
Supports expander cascading
1 TTL serial port
Front and rear tamper protection
LED indicators for power and fault
9–24 VDC power input
Works With
Hikvision AX Hybrid PRO control panels: DS-PHA48-EP(B) (48 zones), DS-PHA64-LP(B) (64 zones) and the DS-PHA64-KIT-WB(B) kit, over the Speed-X bus
Other AX Hybrid PRO expanders: cascade on the Speed-X bus, e.g. DS-PM1-I8O2-H 8-zone input expander
Technical Specifications
Specification
Details
Model
DS-PM1-O4H-H
Product Name
Wired 4-Way Power Relay Expander
Compatible System
Hikvision AX Hybrid PRO
Relay Outputs
4 power relays
Relay Current
Up to 16 A per relay
Bus
2 × Speed-X (1 uplink to the control panel, 1 downlink for the next expander)
Serial Port
1 × TTL
Tamper Protection
Front and rear
LED Indicators
1 × power, 1 × fault
Power Supply
9–24 VDC (typical 12 VDC)
Power Consumption
Max. 210 mA @ 12 VDC; quiescent 65 mA @ 12 VDC
Operating Temperature
-10°C to 40°C
Operating Humidity
10% to 90%
Housing Material
Plastic
Dimensions (W × H × D)
110 × 155 × 32.5 mm
Weight
333.1 g
Why Choose the Hikvision DS-PM1-O4H-H?
Lets the AX Hybrid PRO panel switch higher-power loads through 4 independent relays
Up to 16 A on every relay
Speed-X cascading for larger installations
Compact plastic module with tamper protection
Downloads
⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF)
Warranty: 12-month warranty from the Official Distributor.
The Hikvision DS-PM1-RT-HWB is a 433 MHz Tri-X wireless receiver for the Hikvision AX Hybrid PRO alarm system. It connects to the control panel over the Speed-X bus and adds wireless devices to the wired system: up to 32 wireless detectors, 8 wireless indoor sounders and 4 wireless outdoor sounders.
The wireless transmission distance reaches up to 1,300 m in open space, and the link is protected by frequency hopping and 128-bit AES encryption. Green and orange LEDs show power/find-me and alarm/fault status.
Note: this is the 433 MHz version. It works only with 433 MHz (-WB) Tri-X devices; for 868 MHz devices choose the DS-PM1-RT-HWE.
Key Features
433 MHz Tri-X wireless receiver for AX Hybrid PRO
Up to 32 wireless detectors (portable emergency button not included)
Up to 8 wireless indoor sounders and 4 wireless outdoor sounders
Wireless transmission distance up to 1,300 m in open space
Frequency hopping and 128-bit AES encryption
1 Speed-X bus connection to the control panel
LED indicators: green for power/find me, orange for alarm/fault
9–24 VDC power input
Works With
Hikvision AX Hybrid PRO control panels: DS-PHA48-EP(B) (48 zones), DS-PHA64-LP(B) (64 zones) and the DS-PHA64-KIT-WB(B) kit, over the Speed-X bus
433 MHz Tri-X devices from the official compatibility list: DS-PDP15P-EG2-WB, DS-PDD12P-EG2-WB, DS-PDCL12-EG2-WB, DS-PDC10AM-EG2-WB, DS-PDPG12P-EG2-WB, DS-PDMCK-EG2-WB(B), DS-PDWL-E-WB, DS-PDTPH-E-WB, DS-PDEB1-EG2-WB, DS-PDEBP1-EG2-WB, DS-PS1-E-WB
Technical Specifications
Specification
Details
Model
DS-PM1-RT-HWB
Product Name
Tri-X Wireless Receiver
Compatible System
Hikvision AX Hybrid PRO
RF Frequency
433 MHz
Wireless Technology
Tri-X
Transmission Distance
Up to 1,300 m (open space)
Wireless Security
Frequency hopping, 128-bit AES encryption
Wireless Detectors
Up to 32 (portable emergency button not included)
Wireless Sounders
Up to 8 indoor and 4 outdoor
Bus
1 × Speed-X
LED Indicators
Green: power/find me; orange: alarm/fault
Power Supply
9–24 VDC (typical 12 VDC)
Power Consumption
Max. 100 mA @ 12 VDC; quiescent 40 mA @ 12 VDC
Operating Temperature
-10°C to 40°C
Operating Humidity
10% to 90%
Housing Material
Plastic
Dimensions (W × H × D)
110 × 155 × 32 mm
Weight
233 g
Why Choose the Hikvision DS-PM1-RT-HWB?
Adds wireless detectors and sounders to a wired AX Hybrid PRO system without running new cables
Long 1,300 m open-space range with encrypted, frequency-hopping links
Up to 32 wireless detectors per receiver
Simple Speed-X bus connection to the panel
Downloads
⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF)
Warranty: 12-month warranty from the Official Distributor.
The Hikvision DS-PM1-RT-HWE is an 868 MHz Tri-X wireless receiver for the Hikvision AX Hybrid PRO alarm system. It connects to the control panel over the Speed-X bus and adds wireless devices to the wired system: up to 32 wireless detectors, 8 wireless indoor sounders and 4 wireless outdoor sounders.
The wireless transmission distance reaches up to 1,700 m in open space, and the link is protected by frequency hopping and 128-bit AES encryption. Green and orange LEDs show power/find-me and alarm/fault status.
Note: this is the 868 MHz version. It works only with 868 MHz (-WE) Tri-X devices; for 433 MHz devices choose the DS-PM1-RT-HWB.
Key Features
868 MHz Tri-X wireless receiver for AX Hybrid PRO
Up to 32 wireless detectors (portable emergency button not included)
Up to 8 wireless indoor sounders and 4 wireless outdoor sounders
Wireless transmission distance up to 1,700 m in open space
Frequency hopping and 128-bit AES encryption
1 Speed-X bus connection to the control panel
LED indicators: green for power/find me, orange for alarm/fault
9–24 VDC power input
Works With
Hikvision AX Hybrid PRO control panels: DS-PHA48-EP(B) (48 zones) and DS-PHA64-LP(B) (64 zones), over the Speed-X bus
868 MHz Tri-X devices from the official compatibility list: DS-PDD12P-EG2-WE, DS-PDMC-EG2-WE(B)
Technical Specifications
Specification
Details
Model
DS-PM1-RT-HWE
Product Name
Tri-X Wireless Receiver
Compatible System
Hikvision AX Hybrid PRO
RF Frequency
868 MHz
Wireless Technology
Tri-X
Transmission Distance
Up to 1,700 m (open space)
Wireless Security
Frequency hopping, 128-bit AES encryption
Wireless Detectors
Up to 32 (portable emergency button not included)
Wireless Sounders
Up to 8 indoor and 4 outdoor
Bus
1 × Speed-X
LED Indicators
Green: power/find me; orange: alarm/fault
Power Supply
9–24 VDC (typical 12 VDC)
Power Consumption
Max. 100 mA @ 12 VDC; quiescent 40 mA @ 12 VDC
Operating Temperature
-10°C to 40°C
Operating Humidity
10% to 90%
Housing Material
Plastic
Dimensions (W × H × D)
110 × 155 × 32 mm
Weight
225 g
Why Choose the Hikvision DS-PM1-RT-HWE?
Adds wireless detectors and sounders to a wired AX Hybrid PRO system without running new cables
Long 1,700 m open-space range with encrypted, frequency-hopping links
Up to 32 wireless detectors per receiver
Simple Speed-X bus connection to the panel
Downloads
⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF)
Warranty: 12-month warranty from the Official Distributor.
The Hikvision DS-PS102X is a wired external sounder available with a red or blue LED strobe (DS-PS102X/RED and DS-PS102X/BLUE; choose the colour above). It combines a siren of up to 110 dB at 1 m (106 dBA average) with the LED strobe, and the sound and LED flash indications can be used separately.
It is controlled by the PGM/BELL port of a wired alarm panel, supports positive or negative triggering and offers three alarm sounds: fire, panic and intrusion. Front-cover and wall tamper switches, tamper and cut-wire alarms and an IP55 housing protect it on exterior walls.
Key Features
Sound pressure up to 110 dBA at 1 m (106 dBA average)
Red or blue LED strobe light
Sound and LED flash indication separately
3 alarm sounds: fire, panic and intrusion
Controlled by the PGM/BELL port of the alarm panel
Positive or negative triggering
Tamper alarm and cut-wire alarm
Front cover and wall tamper protection
IP55 protection
9–16 VDC power input, max. 180 mA @ 12 VDC
Works With
Wired alarm control panels with a PGM/BELL output, such as the Hikvision AX Hybrid PRO DS-PHA48-EP(B), DS-PHA64-LP(B) and the DS-PHA64-KIT-WB(B) kit (on-board wired sounder output)
Technical Specifications
Specification
Details
Model
DS-PS102X (DS-PS102X/RED, DS-PS102X/BLUE)
Product Name
Wired External Sounder
Colour
Red or blue strobe
Sound Pressure
110 dBA max. / 106 dBA average at 1 m
Alarm Sounds
Fire, panic, intrusion
Control
PGM/BELL port
Trigger
Positive / negative
Tamper Protection
Front cover and wall; tamper and cut-wire alarm
Power Supply
9–16 VDC (typical 12 VDC)
Power Consumption
Max. 180 mA @ 12 VDC
Ingress Protection
IP55
Operating Temperature
-20°C to +60°C
Operating Humidity
10% to 90%
Housing Material
PC + ABS
Dimensions (W × H × D)
221 × 215 × 51 mm
Weight
475 g
Why Choose the Hikvision DS-PS102X?
Loud 110 dB siren plus a red or blue strobe, so an alarm is both heard and seen
Separate tones for fire, panic and intrusion events
Tamper and cut-wire alarms help detect sabotage
IP55 housing for exterior walls
Warranty: 12-month warranty from the Official Distributor.
The Hikvision DS-PS1 is a wired sounder for wired intrusion alarm panels, available in blue (DS-PS1-B) or red (DS-PS1-R); choose the colour above. It delivers 105 dB at 30 cm and adds an LED flash, and the sound and LED flash indications work separately.
It runs on 8–16 VDC (typical 12 VDC) from the panel's sounder output with a maximum draw of only 70 mA. The IP54 PC + ABS housing works from -20°C to +60°C, and the newly designed structure makes installation easy.
Key Features
Sound pressure of 105 dB at 30 cm
LED flash indication
Sound and LED flash indication separately
IP54 protection
8–16 VDC power input
Low current draw: max. 70 mA, quiescent 45 mA @ 12 VDC
Operating temperature -20°C to +60°C
Easy installation with a newly designed structure
Works With
Wired alarm control panels with a wired sounder (BELL) output, such as the Hikvision AX Hybrid PRO DS-PHA48-EP(B), DS-PHA64-LP(B) and the DS-PHA64-KIT-WB(B) kit (on-board wired sounder output)
Technical Specifications
Specification
Details
Model
DS-PS1-B (blue) / DS-PS1-R (red)
Product Name
Wired Sounder
Sound Pressure
105 dB at 30 cm
Visual Indication
LED flash (sound and flash separately)
Power Supply
8–16 VDC (typical 12 VDC)
Power Consumption
Max. 70 mA @ 12 VDC; quiescent 45 mA @ 12 VDC
Ingress Protection
IP54
Operating Temperature
-20°C to +60°C
Operating Humidity
10% to 90%
Housing Material
PC + ABS
Colour
Blue or red
Dimensions (W × H × D)
140 × 134 × 33 mm
Weight
185 g
Why Choose the Hikvision DS-PS1?
Audible and visual alarm in one compact unit
IP54 housing and a wide -20°C to +60°C operating range
Very low current draw on the panel output
Available in blue and red to match the installation
Downloads
⬇ Download User Manual (PDF)
Warranty: 12-month warranty from the Official Distributor.
The Hikvision DS-PDD12P-EG2 is a wired dual-technology detector that combines PIR with K-band 24 GHz microwave and 3D Fresnel optics. It covers 12 m with an 85.9° angle and 52 detection zones and offers pet immunity up to 30 kg.
Its non-interfering technology allows back-to-back installation without detecting through the wall. Automatic sensitivity, digital temperature compensation, sealed optics and IFT technology help prevent false alarms. It runs on 9–16 VDC, provides a normally closed (NC) alarm output and has selectable EOL resistors for alarm and tamper wiring.
Note: this is the wired version. It connects by cable to a wired zone of an alarm control panel or input expander (see "Works With" below).
Key Features
Dual technology: PIR + 24 GHz microwave
12 m detection range, 85.9° angle, 52 detection zones
Pet immunity up to 30 kg
Automatic sensitivity and digital temperature compensation
3D optics with creep-zone protection for full coverage without dead angles
Non-interfering technology allows back-to-back installation
Selectable EOL resistors for alarm and tamper wiring
Sealed optics against insect interference
9–16 VDC wide voltage range with reverse polarity protection
IFT technology to help prevent false alarms
Optional wall and ceiling brackets (sold separately)
Works With
Wired alarm panels: connects to a wired zone input, e.g. the on-board zones of the AX Hybrid PRO DS-PHA48-EP(B) and DS-PHA64-LP(B) panels or the DS-PHA64-KIT-WB(B) kit
Zone expansion: DS-PM1-I8O2-H 8-zone wired input expander for AX Hybrid PRO panels
Technical Specifications
Specification
Details
Model
DS-PDD12P-EG2
Product Name
Wired Dual-Tech Detector
Detection Method
Passive infrared (PIR) + microwave
Detection Range
12 m
Detection Angle
85.9°
Detection Zones
52
Detectable Speed
0.3–2 m/s
Sensitivity
Auto / Pet
Pet Immunity
30 kg
Microwave Frequency
24 GHz (24.15–24.25 GHz)
White Light Filter
6500 lux
Digital Temperature Compensation
Supported
Creep Zone Protection
Supported
Sealed Optics
Supported
Tamper Protection
Front
Alarm Output
Normally Closed (NC)
LED Indicator
Green (PIR), orange (microwave), blue (alarm)
Transmission Method
Wired
Power Supply
9–16 VDC (12 VDC typical)
Current Consumption
17 mA @ 12 VDC
Mounting Height
1.8–2.4 m
Mounting Method
Wall (optional wall and ceiling bracket)
Application
Indoor
Operating Temperature
-10 °C to 55 °C
Operating Humidity
10% to 90%
Dimensions (W × H × D)
65.7 × 103.8 × 45.5 mm
Weight
99 g
Certifications
EN Grade 2, CE, FCC, CB, CCC, IC, RCM
Why Choose the Hikvision DS-PDD12P-EG2?
PIR plus microwave confirmation helps cut false alarms
Pet-friendly up to 30 kg
Can be installed back to back without detecting through the wall
Simple wiring with selectable EOL resistors and a wide voltage range
Downloads
⬇ Download Datasheet (PDF)
Warranty: 12-month warranty from the Official Distributor.
The Hikvision DS-PDC10DM-VG3 is a wired dual-technology curtain detector with anti-masking. It combines PIR and 24 GHz microwave in a slim body with a narrow 5° curtain, covering up to 10 m when wall mounted or 6 m when ceiling mounted with 32 detection zones.
Active IR anti-masking, directional detection and automatic sensitivity help separate real intrusions from false triggers, and selectable EOL resistors simplify alarm and tamper wiring to a wired zone. The IP65 housing allows outdoor use, and the slim design fits window frames.
Key Features
Dual technology: PIR + 24 GHz microwave
Narrow 5° curtain, 32 detection zones
Range up to 10 m wall mounted, 6 m ceiling mounted
Active IR anti-masking
Directional detection support
Automatic sensitivity
Digital temperature compensation, creep-zone protection, sealed optics and 6500 lux white-light filter
Selectable EOL resistors for alarm and tamper wiring; normally closed alarm output
Front and rear tamper protection
IP65 weather resistance for outdoor use; slim design for window-frame installation
Works With
Wired alarm zones of Hikvision AX Hybrid PRO panels DS-PHA48-EP(B), DS-PHA64-LP(B) and the DS-PHA64-KIT-WB(B) kit
Extra wired zones: the DS-PM1-I8O2-H 8-zone input expander
Technical Specifications
Specification
Details
Model
DS-PDC10DM-VG3
Product Name
Wired Dual-Tech AM Curtain Detector
Detection Method
PIR + microwave
Detection Range
Wall mount: 10 m; ceiling mount: 6 m
Detection Angle
5°
Detection Zones
32
Detectable Speed
0.2–3 m/s
Sensitivity
Auto
Microwave Frequency
24 GHz (24.15–24.25 GHz)
White Light Filter
6500 lux
Anti-Masking
Active IR
Directional Detection
Supported
Tamper Protection
Front and rear
Alarm Output
Normally closed (wired)
LED Indicator
Green (PIR), red (microwave), green + orange (mask), blue (alarm)
Power Supply
9–16 VDC (typical 12 VDC)
Power Consumption
Max. 25 mA @ 12 VDC; quiescent 16 mA @ 12 VDC
Ingress Protection
IP65
Operating Temperature
-25°C to 60°C
Operating Humidity
10% to 90%
Mounting
Wall or ceiling, 2–4 m height
Application
Indoor and outdoor
Dimensions (W × H × D)
29.2 × 134.4 × 39.5 mm
Weight
79 g
What's in the Box
1 × DS-PDC10DM-VG3 curtain detector
1 × L-shaped adapter
Why Choose the Hikvision DS-PDC10DM-VG3?
Protects windows, doors and narrow openings with a tight 5° curtain
PIR plus microwave with anti-masking for reliable detection
IP65 rating for outdoor and semi-outdoor spots
Low 25 mA draw on the alarm panel
Downloads
⬇ Download User Manual (PDF)
Warranty: 12-month warranty from the Official Distributor.
The Hikvision DS-PDC15-EG2(B) is a wired PIR curtain detector that covers up to 15 m with a narrow 6.3° detection angle and 18 detection zones. Its long, narrow coverage forms a detection curtain, so it can protect a corridor, a row of windows or a long wall without covering the whole room.
Digital processing with digital temperature compensation, creep zone protection, sealed optics that keep insects out and a 6500 lux white light filter help prevent false alarms. It works on 9–16 VDC (12 VDC typical) with polarity reverse connection protection, provides a normally closed (NC) alarm output with selectable EOL resistors, and mounts on a wall or ceiling at 2.4–3.6 m.
Note: it connects by cable to a wired zone of an alarm control panel or input expander and is powered at 9–16 VDC (see "Works With" below).
Key Features
Up to 15 m detection range with a narrow 6.3° curtain angle
18 detection zones, detectable speed 0.3–2 m/s
Digital processing with digital temperature compensation
Creep zone protection and sealed optics that prevent insect interference
6500 lux white light filter against false alarms
Normally closed (NC) alarm output with selectable EOL resistors for alarm and tamper wiring
Front tamper protection and blue alarm LED
9–16 VDC wide voltage input with polarity reverse connection protection
Wall or ceiling mounting at 2.4–3.6 m (wall and ceiling brackets sold separately)
Global certifications available: EN Grade 2, CE, CB, IC, RCM
Works With
Wired alarm panels: connects to a wired zone input, e.g. the on-board zones of the AX Hybrid PRO DS-PHA48-EP(B) and DS-PHA64-LP(B) panels or the DS-PHA64-KIT-WB(B) kit
Zone expansion: DS-PM1-I8O2-H 8-zone wired input expander for AX Hybrid PRO panels
Technical Specifications
Specification
Details
Model
DS-PDC15-EG2(B)
Detection Method
Passive Infrared (PIR)
Detection Range
15 m
Detection Angle
6.3°
Detection Zones
18
Detectable Speed
0.3–2 m/s
White Light Filter
6500 lux
Digital Temperature Compensation
Supported
Creep Zone Protection
Supported
Sealed Optics
Supported
Tamper Protection
Front
Alarm Output
Normally Closed (NC)
LED Indicator
Blue (alarm)
Transmission
Wired
Power Supply
9–16 VDC (12 VDC typical)
Current Consumption
11 mA max.
Mounting Height
2.4–3.6 m
Mounting Method
Wall / ceiling (brackets optional)
Application
Indoor
Operating Temperature
-10 °C to 55 °C
Operating Humidity
10% to 90%
Dimensions (W × H × D)
65.4 × 86.8 × 45.5 mm
Weight
68 g
Why Choose the Hikvision DS-PDC15-EG2(B)?
Long, narrow coverage protects corridors, window rows and long walls without covering the whole room
Digital temperature compensation and sealed optics keep detection reliable and false alarms low
Wide 9–16 VDC input with reverse polarity protection makes wiring forgiving
Selectable EOL resistors fit standard alarm panel zone wiring
Downloads
⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF)
Warranty: 12-month warranty from the Official Distributor.
The Hikvision DS-PDC5NC-EG2 is a slim wired PIR curtain detector designed for installation on window frames. It covers up to 5 m with a narrow 5° curtain and 28 detection zones, and supports directional detection and automatic sensitivity.
Digital processing with digital temperature compensation, creep zone protection and a 6500 lux white light filter helps prevent false alarms. It runs on 9–16 VDC (12 VDC typical), gives a normally closed (NC) alarm output with front tamper protection, and its compact 29.7 × 78.1 × 24.8 mm body mounts at a height of 2.4–4 m.
Note: it connects by cable to a wired zone of an alarm control panel or input expander and is powered at 9–16 VDC (see "Works With" below).
Key Features
Slim design for window frame installation
5 m detection range with a narrow 5° curtain angle
28 detection zones, detectable speed 0.3–2 m/s
Automatic sensitivity
Directional detection support
Digital processing with digital temperature compensation and creep zone protection
6500 lux white light filter
Normally closed (NC) alarm output and front tamper protection
9–16 VDC power input, 15 mA max. at 12 VDC
Works With
Wired alarm panels: connects to a wired zone input, e.g. the on-board zones of the AX Hybrid PRO DS-PHA48-EP(B) and DS-PHA64-LP(B) panels or the DS-PHA64-KIT-WB(B) kit
Zone expansion: DS-PM1-I8O2-H 8-zone wired input expander for AX Hybrid PRO panels
Technical Specifications
Specification
Details
Model
DS-PDC5NC-EG2
Detection Method
Passive Infrared (PIR)
Detection Range
5 m
Detection Angle
5°
Detection Zones
28
Detectable Speed
0.3–2 m/s
Sensitivity
Auto
White Light Filter
6500 lux
Digital Temperature Compensation
Supported
Creep Zone Protection
Supported
Directional Detection
Supported
Tamper Protection
Front
Alarm Output
Normally Closed (NC)
LED Indicator
Blue (alarm)
Transmission
Wired
Power Supply
9–16 VDC (12 VDC typical)
Current Consumption
15 mA max., 15 mA quiescent @ 12 VDC
Mounting Height
2.4–4 m
Mounting Method
Ceiling
Application
Indoor
Operating Temperature
-10 °C to 55 °C
Operating Humidity
10% to 90%
Dimensions (W × H × D)
29.7 × 78.1 × 24.8 mm
Weight
31.5 g
Why Choose the Hikvision DS-PDC5NC-EG2?
Slim body fits neatly on window frames
Narrow 5° curtain protects the opening without covering the whole room
Automatic sensitivity and directional detection
Standard 12 VDC wiring with an NC output for wired alarm panels
Downloads
⬇ Download Quick Start Guide (PDF)
Warranty: 12-month warranty from the Official Distributor.
The Hikvision DS-PDC10AM-VG3 is a wired PIR curtain detector with active IR anti-masking and an IP65 weather-resistant housing for indoor and outdoor use. It detects up to 10 m when wall-mounted (6 m when ceiling-mounted) with a narrow 5° curtain and 32 detection zones, and its slim design suits installation on window frames.
Automatic sensitivity, directional detection, digital temperature compensation, creep zone protection, sealed optics and a 6500 lux white light filter keep detection reliable. It works on 9–16 VDC, provides a normally closed (NC) alarm output with selectable EOL resistors and front and rear tamper protection, and comes with an L-shaped adapter for wall or ceiling mounting at 2–4 m.
Note: it connects by cable to a wired zone of an alarm control panel or input expander and is powered at 9–16 VDC (see "Works With" below).
Key Features
Slim design for window frame installation
IP65 weather resistance for outdoor application
Active IR anti-masking with green and orange masking LEDs
Detection range: 10 m wall-mounted, 6 m ceiling-mounted; 5° angle, 32 zones
Automatic sensitivity and directional detection support
Digital temperature compensation, creep zone protection and sealed optics
Selectable EOL resistors for alarm and tamper-proof wiring
Front and rear tamper protection
Wide operating temperature: -25 °C to 60 °C
L-shaped adapter included for wall or ceiling mounting
Works With
Wired alarm panels: connects to a wired zone input, e.g. the on-board zones of the AX Hybrid PRO DS-PHA48-EP(B) and DS-PHA64-LP(B) panels or the DS-PHA64-KIT-WB(B) kit
Zone expansion: DS-PM1-I8O2-H 8-zone wired input expander for AX Hybrid PRO panels
Technical Specifications
Specification
Details
Model
DS-PDC10AM-VG3
Detection Method
Passive Infrared (PIR)
Detection Range
Wall mount: 10 m; ceiling mount: 6 m
Detection Angle
5°
Detection Zones
32
Detectable Speed
0.2–3 m/s
Sensitivity
Auto
Anti-Masking
Supported (active IR)
White Light Filter
6500 lux
Digital Temperature Compensation
Supported
Creep Zone Protection / Sealed Optics
Supported
Directional Detection
Supported
Tamper Protection
Front and rear
Alarm Output
Normally Closed (NC)
LED Indicator
Blue (alarm), green + orange (mask)
Power Supply
9–16 VDC (12 VDC typical)
Current Consumption
22 mA max., 9 mA quiescent @ 12 VDC
Ingress Protection
IP65
Mounting Height
2–4 m
Mounting Method
Wall / ceiling (L-shaped adapter included)
Application
Indoor and outdoor
Operating Temperature
-25 °C to 60 °C
Operating Humidity
10% to 90%
Dimensions (W × H × D)
29.2 × 134.4 × 39.5 mm
Weight
77.5 g
Why Choose the Hikvision DS-PDC10AM-VG3?
Anti-masking reports attempts to cover or block the detector
IP65 housing allows outdoor installation as well as indoor use
Slim profile fits window frames and narrow openings
Selectable EOL resistors and front and rear tamper protection for professional wired installations
Warranty: 12-month warranty from the Official Distributor.
The Hikvision DS-PDCL12-EG2 is a wired 360° PIR ceiling detector with a digital quad pyro sensor. Mounted on the ceiling at 2.4–4 m, it covers a range of up to 12 m in all directions with 172 detection zones, so one detector can protect an open indoor area.
Automatic sensitivity, digital temperature compensation, creep zone protection, sealed optics and a 6500 lux white light filter help prevent false alarms. It runs on 9–16 VDC (12 VDC typical) with low current draw, provides a normally closed (NC) alarm output and has an on-board EOL resistor for simple wiring to a wired alarm panel.
Note: it connects by cable to a wired zone of an alarm control panel or input expander and is powered at 9–16 VDC (see "Works With" below).
Key Features
Digital quad pyro sensor
360° detection with up to 12 m range and 172 detection zones
Automatic sensitivity (Auto / Low)
Digital temperature compensation and creep zone protection
Sealed optics and 6500 lux white light filter
Wide 9–16 VDC voltage adaptation and on-board EOL resistor
Normally closed (NC) alarm output, front tamper protection and blue alarm LED
Low current: 13 mA max., 7 mA quiescent at 12 VDC
Low-profile Ø101.2 × 32.9 mm ceiling housing
Works With
Wired alarm panels: connects to a wired zone input, e.g. the on-board zones of the AX Hybrid PRO DS-PHA48-EP(B) and DS-PHA64-LP(B) panels or the DS-PHA64-KIT-WB(B) kit
Zone expansion: DS-PM1-I8O2-H 8-zone wired input expander for AX Hybrid PRO panels
Technical Specifications
Specification
Details
Model
DS-PDCL12-EG2
Detection Method
Passive Infrared (PIR), digital quad pyro sensor
Detection Range
12 m
Detection Angle
360°
Detection Zones
172
Detectable Speed
0.3–2 m/s
Sensitivity
Low / Auto
White Light Filter
6500 lux
Digital Temperature Compensation
Supported
Creep Zone Protection
Supported
Sealed Optics
Supported
Tamper Protection
Front
Alarm Output
Normally Closed (NC)
LED Indicator
Blue (alarm)
Power Supply
9–16 VDC (12 VDC typical)
Current Consumption
13 mA max., 7 mA quiescent @ 12 VDC
Mounting Height
2.4–4 m
Mounting Method
Ceiling
Application
Indoor
Operating Temperature
-10 °C to 55 °C
Operating Humidity
10% to 90%
Dimensions
Ø101.2 × 32.9 mm
Weight
79 g
Why Choose the Hikvision DS-PDCL12-EG2?
360° ceiling coverage protects a whole open area from a single point
Quad pyro sensor with digital processing for accurate detection
On-board EOL resistor and wide voltage input simplify installation
Discreet, low-profile ceiling design
Warranty: 12-month warranty from the Official Distributor.
The Hikvision DS-PDSMK-4 is a 4-wire photoelectric smoke detector for wired alarm systems. Its stable photoelectric smoke sensing chamber and advanced algorithms provide reliable detection with high immunity against unwanted alarms, and the chamber needs no adjustment or replacement.
It runs on 12 VDC (10.2–13.8 VDC) and signals the alarm panel through an N/C or N/O alarm relay output. Two continuously emitting red LEDs give 360° visibility, and the sleek low-profile Ø100 × 35 mm housing mounts on the ceiling.
Note: this is a 4-wire detector: it needs a 12 VDC supply and a wired zone input of an alarm panel (see "Works With" below).
Key Features
Stable photoelectric smoke sensing chamber – no adjustment or replacement required
Advanced algorithms for detection discrimination
High immunity against unwanted alarms
4-wire model for DC 12 V operation
N/C or N/O alarm relay output
Dual red LEDs for 360° visibility
Sleek low-profile Ø100 × 35 mm ceiling housing
Surface-mount device (SMD) circuit board design
IP42 rating, 0 °C to +50 °C operation
Works With
Wired alarm panels: the relay output connects to a wired zone input and the detector takes 12 VDC, e.g. from the auxiliary output of the AX Hybrid PRO DS-PHA48-EP(B) and DS-PHA64-LP(B) panels or the DS-PHA64-KIT-WB(B) kit
Zone expansion: DS-PM1-I8O2-H 8-zone wired input expander for AX Hybrid PRO panels
Technical Specifications
Specification
Details
Model
DS-PDSMK-4
Detection Type
Photoelectric smoke sensing chamber
Alarm Threshold
0.10–0.16 dB/m (1.51–2.73 %/ft obscuration)
Wiring
4-wire
Alarm Output
N/C or N/O alarm relay
Power Supply
10.2–13.8 VDC (12 VDC)
Indicator
Two continuously emitting red LEDs (360° visibility)
IP Rating
IP42
Installation
Ceiling mounted
Operating Temperature
0 °C to +50 °C
Operating Humidity
0% to 98% RH, non-condensing
Storage Temperature
-25 °C to +80 °C
Dimensions
Ø100 × 35 mm
Why Choose the Hikvision DS-PDSMK-4?
Reliable photoelectric sensing with high immunity to nuisance alarms
Integrates with wired alarm panels through its relay output
Maintenance-friendly chamber with no adjustment needed
Discreet low-profile ceiling design
Warranty: 12-month warranty from the Official Distributor.
The Hikvision DS-PDSMK-4BAR is a 4-wire photoelectric smoke detector with a built-in sounder (≥ 85 dB at 3 m), so it raises a local audible alarm while signalling the alarm panel. Its stable photoelectric smoke sensing chamber and advanced algorithms provide reliable detection with high immunity against unwanted alarms.
It runs on 12 VDC (10.2–13.8 VDC) and connects to the panel through an N/C or N/O alarm relay output. Two continuously emitting red LEDs give 360° visibility, the chamber needs no adjustment or replacement, and the sleek low-profile Ø100 × 35 mm housing mounts on the ceiling.
Note: this is a 4-wire detector: it needs a 12 VDC supply and a wired zone input of an alarm panel (see "Works With" below).
Key Features
Built-in sounder: ≥ 85 dB at 3 m
Stable photoelectric smoke sensing chamber – no adjustment or replacement required
Advanced algorithms for detection discrimination
High immunity against unwanted alarms
4-wire model for DC 12 V operation
N/C or N/O alarm relay output
Dual red LEDs for 360° visibility
Sleek low-profile Ø100 × 35 mm ceiling housing
Surface-mount device (SMD) circuit board design
IP42 rating, 0 °C to +50 °C operation
Works With
Wired alarm panels: the relay output connects to a wired zone input and the detector takes 12 VDC, e.g. from the auxiliary output of the AX Hybrid PRO DS-PHA48-EP(B) and DS-PHA64-LP(B) panels or the DS-PHA64-KIT-WB(B) kit
Zone expansion: DS-PM1-I8O2-H 8-zone wired input expander for AX Hybrid PRO panels
Technical Specifications
Specification
Details
Model
DS-PDSMK-4BAR
Detection Type
Photoelectric smoke sensing chamber
Alarm Threshold
0.10–0.16 dB/m (1.51–2.73 %/ft obscuration)
Wiring
4-wire
Built-in Sounder
≥ 85 dB @ 3 m
Alarm Output
N/C or N/O alarm relay
Power Supply
10.2–13.8 VDC (12 VDC)
Indicator
Two continuously emitting red LEDs (360° visibility)
IP Rating
IP42
Installation
Ceiling mounted
Operating Temperature
0 °C to +50 °C
Operating Humidity
0% to 98% RH, non-condensing
Storage Temperature
-25 °C to +80 °C
Dimensions
Ø100 × 35 mm
Why Choose the Hikvision DS-PDSMK-4BAR?
Local ≥ 85 dB sounder warns people on site immediately
Reliable photoelectric sensing with high immunity to nuisance alarms
Integrates with wired alarm panels through its relay output
Maintenance-friendly chamber and discreet low-profile design
Warranty: 12-month warranty from the Official Distributor.
The Hikvision AX PRO DS-PDBG8-EG2-WB is a wireless glass break detector with a high-quality omni-directional microphone sensor. It detects breaking glass up to 8 m away across a 120° angle, with sensitivity selectable at 2, 4, 6 or 8 m, and covers float, plate, tempered, wired, laminated and double-glazed glass from 2.4 to 6.4 mm thick.
It communicates over Hikvision Tri-X two-way wireless at 433 MHz with frequency hopping and transmission security, up to 1 km in free space, and is fully configurable remotely through the app. Two CR123A batteries give up to 5 years of standby time, and an extra alarm input (NC / NO / impulse count) lets you connect a wired contact.
Note: it needs a 433 MHz Hikvision AX PRO hub, or an AX Hybrid PRO panel with the DS-PM1-RT-HWB 433 MHz Tri-X receiver. It does not work with 868 MHz (-WE) systems.
Key Features
High-quality omni-directional microphone sensor, 8 m range, 120° detection angle
Selectable sensitivity: 2 / 4 / 6 / 8 m
Detects float, plate, tempered, wired, laminated and double-glazed glass (2.4–6.4 mm)
Tri-X two-way wireless at 433 MHz, up to 1 km in free space
Frequency hopping against jamming and secure transmission
Fully remote configurable through the app
Multiple enrolment methods: power-up, remote ID or QR code
Up to 5 years standby battery life (2 × CR123A), easy battery replacement
Front and rear tamper protection
Environment temperature and signal strength indicators
Works With
AX PRO 433 MHz hubs: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB alarm kits
AX Hybrid PRO panels: DS-PHA48-EP(B) and DS-PHA64-LP(B) through the DS-PM1-RT-HWB 433 MHz Tri-X receiver
Range extension: DS-PR1-WB 433 MHz wireless repeater
Technical Specifications
Specification
Details
Model
DS-PDBG8-EG2-WB
Detection Method
Acoustic sensor (omni-directional microphone)
Detection Range
8 m
Detection Angle
120°
Sensitivity
2 m / 4 m / 6 m / 8 m
Glass Type
Float, plate, tempered, wired, laminated, double glazing
Glass Thickness
2.4–6.4 mm
Glass Size
0.3 × 0.3 m to 3 × 3 m
Alarm Input
NC / NO / impulse count
Tamper Protection
Front and rear
LED Indicator
Blue (alarm)
Wireless Technology
Tri-X, two-way RF wireless
Frequency
433 MHz
Wireless Range (free space)
1 km
Frequency Hopping / Transmission Security
Supported
Enrolment Method
Power-up, remote ID, QR code
Battery
2 × CR123A (3 V)
Battery Life
Up to 5 years (standby)
Mounting Method
Wall / ceiling
Application
Indoor
Operating Temperature
-10 °C to 55 °C
Operating Humidity
10% to 90%
Dimensions (W × H × D)
38.8 × 107.0 × 24.5 mm
Weight
83 g
Why Choose the Hikvision DS-PDBG8-EG2-WB?
Raises the alarm when glass is broken, before an intruder gets inside
One detector covers the glass within an 8 m, 120° area
Reliable 433 MHz Tri-X wireless with frequency hopping and long battery life
Quick installation and full remote configuration through the app
Downloads
⬇ Download Datasheet (PDF)⬇ Download Quick Start Guide (PDF)
Warranty: 12-month warranty from the Official Distributor.
The Hikvision DS-PDCL12DT-EG2 is a wired dual-technology ceiling detector that combines a digital quad pyro PIR sensor with 24 GHz microwave detection. Mounted on the ceiling at 2.4–4 m, it covers 360° up to 12 m with 172 detection zones.
The two detection technologies work together with automatic sensitivity, digital temperature compensation, creep zone protection, sealed optics and a 6500 lux white light filter. Four LED colours show PIR, microwave, alarm and fault status, and the detector runs on 9–16 VDC with an on-board EOL resistor for simple wiring to a wired alarm panel.
Note: it connects by cable to a wired zone of an alarm control panel or input expander and is powered at 9–16 VDC (see "Works With" below).
Key Features
Digital quad pyro PIR sensor + 24 GHz microwave (24.15–24.25 GHz)
360° coverage with 12 m range and 172 detection zones
Automatic sensitivity (Auto / Low)
Digital temperature compensation and creep zone protection
Sealed optics and 6500 lux white light filter
LED status: green (PIR), red (microwave), blue (alarm), orange (fault)
Wide 9–16 VDC voltage adaptation and on-board EOL resistor
Front tamper protection
Works With
Wired alarm panels: connects to a wired zone input, e.g. the on-board zones of the AX Hybrid PRO DS-PHA48-EP(B) and DS-PHA64-LP(B) panels or the DS-PHA64-KIT-WB(B) kit
Zone expansion: DS-PM1-I8O2-H 8-zone wired input expander for AX Hybrid PRO panels
Technical Specifications
Specification
Details
Model
DS-PDCL12DT-EG2
Detection Method
Passive Infrared (PIR) + microwave
Microwave Frequency
24 GHz (24.15–24.25 GHz)
Detection Range
12 m
Detection Angle
360°
Detection Zones
172
Detectable Speed
0.3–2 m/s
Sensitivity
Auto / Low
White Light Filter
6500 lux
Digital Temperature Compensation
Supported
Creep Zone Protection
Supported
Sealed Optics
Supported
Tamper Protection
Front
LED Indicator
Green (PIR), red (microwave), blue (alarm), orange (fault)
Power Supply
9–16 VDC (12 VDC typical)
Power Consumption
100 mA max.
Mounting Height
2.4–4 m
Mounting Method
Ceiling
Application
Indoor
Operating Temperature
-10 °C to 55 °C
Operating Humidity
10% to 90%
Dimensions
Ø120 × 33.2 mm
Weight
138 g
Why Choose the Hikvision DS-PDCL12DT-EG2?
Two detection technologies in one ceiling detector
360° coverage of an open indoor area from a single ceiling point
Clear LED diagnostics for each sensor and for faults
On-board EOL resistor and wide voltage input for quick wiring
Downloads
⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF)
Warranty: 12-month warranty from the Official Distributor.
Explore security alarm systems designed to help protect your home, office, or shop. Choose suitable security solutions for your space and needs from Bestways Jordan.
