The Hikvision DS-PM2-S(EU) 3G/4G Communication Module adds cellular communication to Hikvision AX Hybrid PRO control panels with 4G, 3G and 2G support: FDD-LTE B1/B3/B7/B8/B20, dual-band UMTS/HSDPA/HSPA+ B1/B8 and GSM/GPRS/EDGE 900/1800 MHz. With a SIM card in its slot, the panel can report alarm events over the mobile network on a main or backup path and send SMS notifications. Support for three network generations gives more coverage options at the installation site. Note: this is the EU-region version. Check that your mobile operator uses the listed bands; the DS-PM2-S(AU) version covers a different set of LTE bands. Key Features Adds 3G/4G cellular alarm communication to AX Hybrid PRO control panels FDD-LTE: B1/B3/B7/B8/B20 Dual-band UMTS/HSDPA/HSPA+: B1/B8 GSM/GPRS/EDGE: 900/1800 MHz 1 SIM card slot Enables SMS notifications from the panel Works as a main or backup path in the panel's dual-path communication Compact 62.03 × 88.28 mm board, 28 g Works With AX Hybrid PRO control panels: DS-PHA48-EP(B), DS-PHA64-LP(B) and the DS-PHA64-KIT-WB(B) kit Technical Specifications Specification Details Model DS-PM2-S(EU) Product Name 3G/4G Communication Module (EU) System Hikvision AX Hybrid PRO 4G (FDD-LTE) B1/B3/B7/B8/B20 3G (UMTS/HSDPA/HSPA+) B1/B8 (dual-band) 2G (GSM/GPRS/EDGE) 900/1800 MHz SIM Slot 1 SMS Notification Supported (through the control panel) Operating Temperature -10 °C to +40 °C Dimensions (W × H) 62.03 × 88.28 mm Weight 28 g Why Choose the Hikvision DS-PM2-S(EU)? One module covering 4G, 3G and 2G networks Reports alarms without depending on the site's wired network or phone line Adds SMS notifications to the panel Simple add-on for AX Hybrid PRO control panels Downloads ⬇ Download Datasheet (PDF) Warranty: 12-month warranty from the Official Distributor.
65.000 JD
The Hikvision DS-PM2-S(AU) 3G/4G Communication Module adds 4G LTE cellular communication to Hikvision AX Hybrid PRO control panels. Built on the SIM7600SA-H cellular module, it covers LTE-FDD bands B1/B2/B3/B4/B5/B7/B8/B28/B66 and LTE-TDD band B40. It has 2 SIM card slots, with one card used at a time. With the module fitted, the panel can report alarm events over the mobile network on a main or backup path and send SMS notifications. Note: this is the AU-region version. Check that your mobile operator uses one of the listed LTE bands; the DS-PM2-S(EU) version covers FDD-LTE B1/B3/B7/B8/B20 plus 3G and 2G networks. Key Features Adds 3G/4G cellular alarm communication to AX Hybrid PRO control panels SIM7600SA-H cellular module LTE-FDD bands: B1/B2/B3/B4/B5/B7/B8/B28/B66 LTE-TDD band: B40 2 SIM card slots (one card in use at a time) Enables SMS notifications from the panel Works as a main or backup path in the panel's dual-path communication Compact 62.03 × 88.28 mm board, 28 g Works With AX Hybrid PRO control panels: DS-PHA48-EP(B), DS-PHA64-LP(B) and the DS-PHA64-KIT-WB(B) kit Technical Specifications Specification Details Model DS-PM2-S(AU) Product Name 3G/4G Communication Module (AU) System Hikvision AX Hybrid PRO Cellular Module SIM7600SA-H LTE-FDD Bands B1/B2/B3/B4/B5/B7/B8/B28/B66 LTE-TDD Band B40 SIM Slots 2 (only one card can be used at a time) SMS Notification Supported (through the control panel) Operating Temperature -10 °C to +40 °C Dimensions (W × H) 62.03 × 88.28 mm Weight 28 g Why Choose the Hikvision DS-PM2-S(AU)? A 4G LTE reporting path that does not depend on the site's wired network Two SIM card slots in one module Wide LTE band list for AU-region networks Simple add-on for AX Hybrid PRO control panels Downloads ⬇ Download Datasheet (PDF) Warranty: 12-month warranty from the Official Distributor.
65.000 JD
The Hikvision DS-PM2-G GPRS Communication Module adds GPRS cellular communication to Hikvision AX Hybrid PRO control panels. With a SIM card in its slot, the panel can report alarm events over the mobile network and send SMS notifications. AX Hybrid PRO panels report alarm events on a main and a backup path with configurable priority, so the cellular link can be the main path where there is no wired network, or the backup to LAN or PSTN. The module weighs just 17 g and measures 61.87 × 88.18 mm. Note: for AX Hybrid PRO control panels (see "Works With" below). A SIM card from your mobile operator is required. Key Features Adds GPRS cellular alarm communication to AX Hybrid PRO control panels 1 SIM card slot Enables SMS notifications from the panel Works as a main or backup path in the panel's dual-path communication An alarm path that does not depend on the site's wired network or phone line Compact 61.87 × 88.18 mm board, 17 g Operating temperature -10 °C to +40 °C Works With AX Hybrid PRO control panels: DS-PHA48-EP(B), DS-PHA64-LP(B) and the DS-PHA64-KIT-WB(B) kit Technical Specifications Specification Details Model DS-PM2-G Product Name GPRS Communication Module System Hikvision AX Hybrid PRO Cellular Network GPRS SIM Slot 1 SMS Notification Supported (through the control panel) Operating Temperature -10 °C to +40 °C Dimensions (W × H) 61.87 × 88.18 mm Weight 17 g Why Choose the Hikvision DS-PM2-G? Keeps alarms reporting without a wired internet connection or landline Adds SMS notifications to the panel Simple add-on for AX Hybrid PRO control panels Small, light module Downloads ⬇ Download Datasheet (PDF) Warranty: 12-month warranty from the Official Distributor.
35.000 JD
The Hikvision DS-PM2-P PSTN Communication Module adds a landline (PSTN) communication path to Hikvision AX Hybrid PRO control panels. The panel can then report alarm events over the telephone line to an alarm receiving centre using the Contact ID protocol (SIA DC-05-1999.09). AX Hybrid PRO panels report alarm events on a main and a backup path with configurable priority, so the PSTN line can serve as either path. The module draws only 0.36 W and measures 44.10 × 74.06 mm. Note: for AX Hybrid PRO control panels (see "Works With" below). A working PSTN telephone line is required. Key Features Adds PSTN (landline) alarm communication to AX Hybrid PRO control panels Contact ID (SIA DC-05-1999.09) reporting to alarm receiving centres Works as a main or backup path in the panel's dual-path communication Low power consumption: 0.36 W in total Compact 44.10 × 74.06 mm board, 43.5 g Operating range -10 °C to 40 °C, 10% to 90% humidity Works With AX Hybrid PRO control panels: DS-PHA48-EP(B), DS-PHA64-LP(B) and the DS-PHA64-KIT-WB(B) kit Technical Specifications Specification Details Model DS-PM2-P Product Name PSTN Communication Module System Hikvision AX Hybrid PRO Communication PSTN (landline) ARC Protocol Contact ID (SIA DC-05-1999.09) Power Consumption 5 V 0.21 W, 3.3 V 0.15 W (0.36 W total) Operating Temperature -10 °C to 40 °C Operating Humidity 10% to 90% Dimensions (W × H) 44.10 × 74.06 mm Weight 43.5 g Why Choose the Hikvision DS-PM2-P? A landline reporting path for sites that already have a telephone line Standard Contact ID reporting for alarm receiving centres Can act as the backup route when the main path fails Very low power draw Warranty: 12-month warranty from the Official Distributor.
30.000 JD
The Hikvision AX Hybrid PRO Wired LCD Keypad (DS-PK1-LRT-HWB) is a wired keypad with an LCD screen and a built-in tag reader for Hikvision AX Hybrid PRO control panels. It connects over the Speed-X bus and lets users Away arm, Stay arm, disarm, query the system and control alarm outputs, with one-touch arming that needs no password. Dedicated Fire, Panic and Medical alarm keys are built in, and the screen can show your company name, phone number and the time. The keypad also supports up to 64 keyfobs at 433 MHz and has 2 on-board alarm inputs and 1 alarm output for wiring nearby devices straight to the keypad. Note: this is a wired keypad for AX Hybrid PRO control panels (see "Works With" below). It runs on 12 VDC (10.2–14.4 VDC), and its keyfob receiver works at 433 MHz, so use 433 MHz (-WB) keyfobs such as the DS-PKF1-WB. Key Features LCD screen with 4 status indicators and white key backlight Built-in tag reader One-touch arming without a password Away Arm, Stay Arm, Disarm, Query and Alarm Output keys Fire, Panic and Medical alarm keys Shows the company name, phone number and time Supports up to 64 keyfobs at 433 MHz 2 on-board alarm inputs and 1 on-board alarm output Speed-X bus connection to the control panel Built-in buzzer and back-cover tamper switch Works With AX Hybrid PRO control panels: DS-PHA48-EP(B) and DS-PHA64-LP(B), also as an extra keypad for the DS-PHA64-KIT-WB(B) kit Keyfobs (433 MHz): DS-PKF1-WB Technical Specifications Specification Details Model DS-PK1-LRT-HWB Product Name Wired LCD Keypad System Hikvision AX Hybrid PRO Display LCD screen Tag Reader 1 built-in tag reader Function Keys 8: Query, Away Arm, Stay Arm, Disarm, Alarm Output, Project, Left, Right Numeric Keys 0–9, *, # Bus 1 × Speed-X bus (RS-485) Alarm Inputs 2 on-board Alarm Output 1 on-board RF Frequency 433 MHz Keyfobs Up to 64 Indicators Power (green), Fault (orange), Armed (blue), Alarm (red); white key backlight Buzzer 1 on-board Tamper Protection Back-cover tamper switch Serial Port 1 × TTL Power Supply 10.2–14.4 VDC (12 VDC typical) Power Consumption Max 150 mA, quiescent 72 mA @ 12 VDC Operating Temperature -10 °C to +55 °C Operating Humidity 10% to 90% Color White Dimensions 150 × 115 × 28 mm Why Choose the Hikvision DS-PK1-LRT-HWB? One control point with screen, tag reader and keyfob support Wired to the panel bus, so there are no keypad batteries to change Extra inputs and an output at the keypad save cable runs back to the panel Dedicated keys for fire, panic and medical emergencies Downloads ⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF) Warranty: 12-month warranty from the Official Distributor.
49.000 JD
The Hikvision AX Hybrid PRO Kit DS-PHA64-KIT-WB(B) is a 433 MHz starter kit for the AX Hybrid PRO hybrid alarm system. It combines the DS-PHA64-LP(B) control panel with a wired LCD keypad with tag reader, a magnetic contact, two PIR detectors, a wireless keyfob and two tags, so you can start a wired-and-wireless alarm system from one box. The panel handles up to 64 zones and 64 outputs in 32 areas (8 zones and 4 outputs on board), supports up to 8 wired PIR-camera detectors on its Speed-X bus and 4-channel IP camera video verification. It reports alarm events over LAN, Wi-Fi, PSTN, GPRS or 3G/4G on a main and a backup path, and users arm and disarm by keypad, keyfob, tag, SMS, iVMS-4200 or the mobile client. Note: the 12 V 7 Ah lead-acid backup battery is not included. This is the 433 MHz (-WB) kit: add more wireless detectors and sirens through the DS-PM1-RT-HWB 433 MHz Tri-X receiver and choose -WB devices only (see "Works With" below). Key Features Complete AX Hybrid PRO starter kit: control panel, wired LCD keypad with tag reader, magnetic contact, 2 PIR detectors, keyfob and 2 tags 433 MHz (-WB) kit version Up to 64 zones (8 on board) and 64 outputs (4 on board) in 32 areas, for up to 64 users 1 Speed-X bus with up to 8 wired PIR-camera detectors 4-channel on-board IP camera video verification with alarm clips Dual-path alarm reporting over LAN, Wi-Fi, PSTN, GPRS or 3G/4G with configurable priority Arming by keypad, keyfob, tag, SMS, iVMS-4200 or the mobile client, with push notifications through Hik-Connect Room for up to 8 keypads, 64 keyfobs, 64 tags and 16 wireless sounders Built-in 100–240 VAC power supply with backup battery support (up to 36 hours) Works With Wireless devices (433 MHz): DS-PM1-RT-HWB Tri-X receiver for AX PRO -WB detectors and sirens; extra DS-PKF1-WB keyfobs Extra keypads: DS-PK1-LRT-HWB wired LCD keypad with tag reader Speed-X expanders: DS-PM1-I8O2-H 8-zone input expander, DS-PM1-O4L-H and DS-PM1-O4H-H 4-way relay expanders Visual verification: DS-PDPC12P-EG2 wired PIR-camera detector (up to 8) Communication modules: DS-PM2-P (PSTN), DS-PM2-G (GPRS), DS-PM2-S(EU) and DS-PM2-S(AU) (3G/4G) Wired sounder: DS-PS102X external sounder with strobe light, driven by the bell output Technical Specifications Specification Details Model DS-PHA64-KIT-WB(B) Kit Version 433 MHz (-WB) Control Panel DS-PHA64-LP(B) Keypad DS-PK1-LRT-HWB wired LCD keypad with tag reader Zones 64 (8 on-board; up to 8 wired PIR-camera detectors) Alarm Outputs 64 (including 2 on-board relay outputs and 2 on-board I/O outputs) Areas 32 Users Installer 1, Administrator 1, Operator 62 Keypads / Keyfobs / Tags 8 / 64 / 64 Wireless Sounders 16 Bus 1 × Speed-X bus Video Verification 4 on-board video clip channels Network 1 × RJ45 10/100 Mbps Ethernet; Wi-Fi 802.11b/g/n (2.4 GHz) Cellular GPRS or 3G/4G, optional SMS Notification Supported (with GPRS/3G/4G module) Protocols DC-09 (ADM-CID / SIA-DCS), CSV-IP, ISUP 5.0, ISAPI, Cloud P2P Programming Web, iVMS-4200, Hik-Partner Pro, keypad Power Output Bell: max 12 V 1.2 A; AUX: max 12 V 1.5 A Power Input 100–240 VAC (on-board transformer) Backup Battery 12 V 7 Ah lead-acid (not included), up to 36 hours Tamper Protection Removal from mounting and front cover open Operating Temperature -10 °C to 40 °C (control panel) Panel Dimensions 261 × 199 × 86.4 mm Panel Weight 997 g What's in the Box 1 × DS-PHA64-LP(B) AX Hybrid PRO control panel 1 × DS-PK1-LRT-HWB wired LCD keypad with tag reader 1 × DS-PD1-MC-WS magnetic contact 2 × DS-PDP18-EG2(B) PIR detectors 1 × DS-PKF1-WB wireless keyfob 2 × DS-PT-M1 tags Why Choose the Hikvision DS-PHA64-KIT-WB(B)? Everything needed to start in one box, built around a panel that grows to 64 zones Mix wired detectors with 433 MHz wireless devices where cabling is difficult Visual alarm verification with PIR-camera detectors and IP cameras Main and backup reporting paths help alarm events get through Downloads ⬇ Download Control Panel Datasheet (PDF)⬇ Download Keypad User Manual (PDF) Warranty: 12-month warranty from the Official Distributor.
135.000 JD
The Hikvision AX Hybrid PRO DS-PHA64-LP(B) is a hybrid intrusion alarm control panel that combines the reliability of wired detectors with the flexibility of wireless devices. It handles up to 64 zones and 64 outputs in 32 areas: 8 zones and 4 outputs are on board, and up to 56 wired or wireless zones and 60 outputs are added through expansion. Its Speed-X bus connects wired keypads, expanders and up to 8 wired PIR-camera detectors, and the panel supports 4-channel IP camera video verification with short alarm clips for checking an alarm by email or in the mobile client. Alarm events are reported over LAN, Wi-Fi, PSTN, GPRS or 3G/4G on a main and a backup path, and users arm and disarm by keypad, keyfob, tag, SMS, iVMS-4200 or the mobile client. Note: the 12 V 7 Ah lead-acid backup battery is not included. GPRS or 3G/4G communication needs an optional communication module, and wireless devices are added through a Tri-X receiver of the matching frequency (see "Works With" below). Key Features Hybrid system: 8 on-board zones plus up to 56 expandable wired or wireless zones (64 in total) 4 on-board outputs (2 NO/NC relay outputs and 2 PGM outputs), expandable to 64 outputs 32 areas and up to 64 users (1 installer, 1 administrator, 62 operators) 1 Speed-X bus for keypads, expanders and up to 8 wired PIR-camera detectors 4-channel on-board IP camera video verification with alarm clips (5 s pre-alarm + 2 s post-alarm, or 2 s + 5 s) Dual-path alarm reporting over LAN, Wi-Fi, PSTN, GPRS or 3G/4G, with main and backup channels and configurable priority Arming and disarming by keypad, keyfob, tag, SMS, iVMS-4200 or the mobile client Push alarm notifications through messages and Hik-Connect Alarm receiving centre protocols DC-09 (ADM-CID / SIA-DCS), CSV-IP and ISUP 5.0, plus ISAPI and Cloud P2P Built-in 100–240 VAC power supply with backup battery support (up to 36 hours) Works With Keypad: DS-PK1-LRT-HWB wired LCD keypad with tag reader (up to 8 keypads) Wireless devices: through the DS-PM1-RT-HWB (433 MHz, for -WB devices) or DS-PM1-RT-HWE (868 MHz, for -WE devices) Tri-X receiver; pair only devices of the receiver's frequency Speed-X expanders: DS-PM1-I8O2-H 8-zone input expander, DS-PM1-O4L-H and DS-PM1-O4H-H 4-way relay expanders Visual verification: DS-PDPC12P-EG2 wired PIR-camera detector (up to 8) Communication modules: DS-PM2-P (PSTN), DS-PM2-G (GPRS), DS-PM2-S(EU) and DS-PM2-S(AU) (3G/4G) Wired sounder: DS-PS102X external sounder with strobe light, driven by the bell output Technical Specifications Specification Details Model DS-PHA64-LP(B) Product Name AX Hybrid PRO Control Panel Zones 64 (8 on-board; up to 8 wired PIR-camera detectors) Alarm Outputs 64 (including 2 on-board relay outputs and 2 on-board I/O outputs) Areas 32 Users Installer 1, Administrator 1, Operator 62 Keypads / Keyfobs / Tags 8 / 64 / 64 Wireless Sounders 16 Bus 1 × Speed-X bus Video Verification 4 on-board video clip channels Network 1 × RJ45 10/100 Mbps Ethernet; Wi-Fi 802.11b/g/n (2.4 GHz) Cellular GPRS or 3G/4G, optional SMS Notification Supported (with GPRS/3G/4G module) Protocols DC-09 (ADM-CID / SIA-DCS), CSV-IP, ISUP 5.0, ISAPI, Cloud P2P Programming Web, iVMS-4200, Hik-ProConnect, keypad EOL Resistance 1K, 2.2K, 4.7K, 5.6K, 6.8K, 8.2K Power Output Bell: max 12 V 1.2 A; AUX: max 12 V 1.5 A; Bell + AUX: max 12 V 2.1 A Power Input 100–240 VAC (on-board transformer) Backup Battery 12 V 7 Ah lead-acid (not included), up to 36 hours Tamper Protection Removal from mounting and front cover open Operating Temperature -10 °C to 40 °C Operating Humidity 10% to 90% Housing Plastic, white Dimensions 261 × 199 × 86.4 mm Weight 997 g Why Choose the Hikvision DS-PHA64-LP(B)? Wired reliability and wireless flexibility in one control panel Visual verification with PIR-camera detectors and IP cameras shows what triggered an alarm before anyone responds Main and backup reporting paths help alarm events get through Grows from 8 on-board zones to 64 zones in 32 areas as the site needs Downloads ⬇ Download Datasheet (PDF) Warranty: 12-month warranty from the Official Distributor.
95.000 JD
The Hikvision AX Hybrid PRO DS-PHA48-EP(B) is a hybrid intrusion alarm control panel that combines the reliability of wired detectors with the flexibility of wireless devices. It handles up to 48 zones and 48 outputs in 16 areas: 8 zones and 4 outputs are on board, and up to 40 wired or wireless zones and 44 outputs are added through expansion. Its Speed-X bus connects wired keypads, expanders and up to 4 wired PIR-camera detectors, and the panel supports 2-channel IP camera video verification with short alarm clips for checking an alarm by email or in the mobile client. Alarm events are reported over LAN, PSTN, GPRS or 3G/4G on a main and a backup path, and users arm and disarm by keypad, keyfob, tag, SMS, iVMS-4200 or the mobile client. Note: the 12 V 7 Ah lead-acid backup battery is not included. GPRS or 3G/4G communication needs an optional communication module, and wireless devices are added through a Tri-X receiver of the matching frequency (see "Works With" below). Key Features Hybrid system: 8 on-board zones plus up to 40 expandable wired or wireless zones (48 in total) 4 on-board outputs (2 NO/NC relay outputs and 2 PGM outputs), expandable to 48 outputs 16 areas and up to 48 users (1 installer, 1 administrator, 46 operators) 1 Speed-X bus for keypads, expanders and up to 4 wired PIR-camera detectors 2-channel on-board IP camera video verification with alarm clips (5 s pre-alarm + 2 s post-alarm, or 2 s + 5 s) Dual-path alarm reporting over LAN, PSTN, GPRS or 3G/4G, with main and backup channels and configurable priority Arming and disarming by keypad, keyfob, tag, SMS, iVMS-4200 or the mobile client Push alarm notifications through messages and Hik-Connect Alarm receiving centre protocols DC-09 (ADM-CID / SIA-DCS), CSV-IP and ISUP 5.0, plus ISAPI and Cloud P2P Built-in 100–240 VAC power supply with backup battery support (up to 36 hours) Works With Keypad: DS-PK1-LRT-HWB wired LCD keypad with tag reader (up to 4 keypads) Wireless devices: through the DS-PM1-RT-HWB (433 MHz, for -WB devices) or DS-PM1-RT-HWE (868 MHz, for -WE devices) Tri-X receiver; pair only devices of the receiver's frequency Speed-X expanders: DS-PM1-I8O2-H 8-zone input expander, DS-PM1-O4L-H and DS-PM1-O4H-H 4-way relay expanders Visual verification: DS-PDPC12P-EG2 wired PIR-camera detector (up to 4) Communication modules: DS-PM2-P (PSTN), DS-PM2-G (GPRS), DS-PM2-S(EU) and DS-PM2-S(AU) (3G/4G) Wired sounder: DS-PS102X external sounder with strobe light, driven by the bell output Technical Specifications Specification Details Model DS-PHA48-EP(B) Product Name AX Hybrid PRO Control Panel Zones 48 (8 on-board; up to 4 wired PIR-camera detectors) Alarm Outputs 48 (including 2 on-board relay outputs and 2 on-board I/O outputs) Areas 16 Users Installer 1, Administrator 1, Operator 46 Keypads / Keyfobs / Tags 4 / 48 / 48 Wireless Sounders 8 Bus 1 × Speed-X bus Video Verification 2 on-board video clip channels Network 1 × RJ45 10/100 Mbps Ethernet Cellular GPRS or 3G/4G, optional SMS Notification Supported (with GPRS/3G/4G module) Protocols DC-09 (ADM-CID / SIA-DCS), CSV-IP, ISUP 5.0, ISAPI, Cloud P2P Programming Web, iVMS-4200, Hik-ProConnect EOL Resistance 1K, 2.2K, 4.7K, 5.6K, 6.8K, 8.2K Power Output Bell: max 12 V 1.2 A; AUX: max 12 V 1.5 A; Bell + AUX: max 12 V 2.1 A Power Input 100–240 VAC (on-board transformer) Backup Battery 12 V 7 Ah lead-acid (not included), up to 36 hours Tamper Protection Removal from mounting and front cover open Operating Temperature -10 °C to 40 °C Operating Humidity 10% to 90% Housing Plastic, white Dimensions 261 × 199 × 86.4 mm Weight 996.5 g Why Choose the Hikvision DS-PHA48-EP(B)? Wired reliability and wireless flexibility in one control panel Visual verification with PIR-camera detectors and IP cameras shows what triggered an alarm before anyone responds Main and backup reporting paths help alarm events get through Grows from 8 on-board zones to 48 zones in 16 areas as the site needs Downloads ⬇ Download Datasheet (PDF) Warranty: 12-month warranty from the Official Distributor.
80.000 JD
The Hikvision AX PRO Wireless LCD Keypad (DS-PK1-LT-WB) is a wall-mounted keypad with an LCD screen and built-in tag reader for the Hikvision AX PRO wireless alarm system. The screen and LEDs show the system status, and you can configure the system directly from the LCD. Users can Stay arm, Away arm and disarm, trigger a silent alarm and control outputs, and one-push Fire, Panic and Medical alarms are built in. It uses Tri-X 433 MHz two-way wireless with up to 800 m range in open areas, and runs on four CR123 batteries for up to 2 years. Note: this is the 433 MHz (-WB) version. It needs a 433 MHz AX PRO hub (see "Works With" below) and does not pair with 868 MHz (-WE) devices or hubs. Key Features LCD screen and LEDs show the system status Built-in tag reader System configuration through the LCD screen Stay / Away arming, disarming, silent alarm and output control One-push Fire, Panic and Medical alarms Full touch keys with LED backlight Front and rear tamper protection and built-in buzzer Tri-X 433 MHz two-way wireless, up to 800 m in open areas Up to 2 years of battery life on four CR123 batteries Fully configurable remotely through the app Works With Hikvision AX PRO hubs (433 MHz): DS-PWA96-KIT-WB and DS-PWA64-KIT-WB alarm kits Longer distances: DS-PR1-WB 433 MHz wireless repeater Also on the same AX PRO system: DS-PKF1-WB keyfob and DS-PS1-E-WB outdoor siren Technical Specifications Specification Details Model DS-PK1-LT-WB Product Name Wireless LCD Keypad System Hikvision AX PRO (Tri-X Wireless) Display LCD screen with LED indicators Tag Reader Built-in Keys Number keys 0–9; function keys *, #, Query, Away Arm, Stay Arm, Disarm, Output, Project, Right, Left LED Indicators Fault (orange), Enrollment/Signal (red/green), Arm (blue), Disarm (green), Alarm (red) Buzzer Supported Tamper Protection Front and rear RF Frequency 433 MHz RF Modulation 2GFSK RF Distance 800 m (open area) Power Supply 4 × CR123 batteries (3 V) Battery Life Up to 2 years (standby time) Power Consumption Quiescent 80 µA; max 300 mA Installation Wall mounting Operating Temperature -10 °C to +55 °C Operating Humidity 10% to 90% Color White Dimensions 174.63 × 109.62 × 25.25 mm Weight 348 g with batteries; 282 g without batteries Why Choose the Hikvision DS-PK1-LT-WB? The LCD shows the system status as text, not only as LEDs Quick arming and disarming with a tag instead of typing a code Configure the system right at the keypad Wireless, with long battery life and front and rear tamper protection Downloads ⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF) Warranty: 12-month warranty from the Official Distributor.
59.000 JD
The Hikvision AX PRO Wireless LED Keypad (DS-PK1-E-WB) is a battery-powered touch keypad for the Hikvision AX PRO wireless alarm system. Use it to arm (Stay or Away), disarm and clear alarms for a single area or for all areas, while LEDs show the programmed areas. It has full touch keys with LED backlight and one-push Fire, Panic and Medical alarms, each selectable as silent or audible. The keypad links to the hub over 433 MHz two-way wireless with AES-128 encryption and frequency hopping, reaches up to 900 m in open areas, and runs on four AA batteries for up to 2 years. Note: this is the 433 MHz (-WB) version. It needs a 433 MHz AX PRO hub (see "Works With" below) and does not pair with 868 MHz (-WE) devices or hubs. Key Features Stay and Away arming, disarming and alarm clearing for specified areas or all areas LEDs show the programmed areas One-push Fire, Panic and Medical alarms, silent or audible Output control from the keypad Full touch keys with LED backlight 433 MHz two-way wireless with AES-128 encryption Frequency hopping against jamming for reliable transmission Up to 900 m wireless range in open areas Up to 2 years of battery life on four easy-to-replace AA batteries Fully configurable remotely through the app, with multiple enrollment methods Works With Hikvision AX PRO hubs (433 MHz): DS-PWA96-KIT-WB and DS-PWA64-KIT-WB alarm kits Longer distances: DS-PR1-WB 433 MHz wireless repeater Also on the same AX PRO system: DS-PKF1-WB keyfob and DS-PS1-E-WB outdoor siren Technical Specifications Specification Details Model DS-PK1-E-WB Product Name Wireless LED Keypad System Hikvision AX PRO Keys Full touch keys with LED backlight Arming Functions Stay / Away arm, disarm, alarm clearing (specified area or all areas) Emergency Alarms One-push Fire, Panic, Medical (silent or audible) Output Control Supported RF Frequency 433 MHz RF Modulation 2GFSK RF Distance 900 m (open area) Encryption AES-128 Frequency Hopping Supported Power Supply 4 × AA batteries Battery Life Up to 2 years (standby time) Installation Screw mounting Operating Temperature -10 °C to +55 °C Operating Humidity 10% to 90% (non-condensing) Dimensions 140 × 86 × 22 mm Weight 151 g (without batteries) Why Choose the Hikvision DS-PK1-E-WB? A simple control point by the door, so nobody needs a phone to arm or disarm One-push emergency alarms for fire, panic and medical situations Encrypted two-way wireless with long range and no cables to run Up to 2 years between battery changes, and the batteries are easy to replace Downloads ⬇ Download User Manual (PDF) Warranty: 12-month warranty from the Official Distributor.
45.000 JD
The Hikvision AX PRO Wireless Water Leak Detector (DS-PDWL-E-WB) gives early warning of water leaks as part of a Hikvision AX PRO wireless alarm system. It comes with an external water probe, so the probe sits at the likely leak point while the detector itself is mounted in a convenient spot nearby. The IP66 housing suits damp areas, and Tri-X two-way wireless at 433 MHz reaches up to 1 km in open space, with frequency hopping against jamming. One CR2450 battery lasts up to 3 years in standby. Note: this is the 433 MHz (-WB) version. It needs a 433 MHz AX PRO hub or an AX Hybrid PRO panel with the DS-PM1-RT-HWB receiver (see "Works With" below) and does not pair with 868 MHz (-WE) devices or hubs. Key Features Early warning of water leaks, with an external probe included IP66 water-proof design for many kinds of installation Tri-X two-way wireless at 433 MHz, up to 1 km range in open space Frequency hopping against jamming and secured transmission Front and rear tamper protection Blue alarm LED, signal strength indicator and environment temperature indicator Up to 3 years of battery life on one CR2450 battery Easy enrollment by power-up, remote ID or QR code Fully configurable remotely through the app Compact 62.4 × 62.4 × 14.6 mm body for wall or surface mounting Works With Hikvision AX PRO hubs (433 MHz): DS-PWA96-KIT-WB and DS-PWA64-KIT-WB alarm kits AX Hybrid PRO panels: through the DS-PM1-RT-HWB 433 MHz Tri-X wireless receiver Longer distances: DS-PR1-WB 433 MHz wireless repeater Also on the same AX PRO system: DS-PS1-E-WB outdoor siren, DS-PK1-E-WB and DS-PK1-LT-WB keypads Technical Specifications Specification Details Model DS-PDWL-E-WB Product Name Wireless Water Leak Detector System Hikvision AX PRO (Tri-X Wireless) Transmission Frequency 433 MHz Transmission Method Two-way RF wireless Transmission Range 1 km (free space) Frequency Hopping Supported Transmission Security Supported Enrollment Power-up, remote ID, QR code Tamper Protection Front and rear LED Indicator Blue (alarm) Other Indicators Signal strength, environment temperature Power Supply 3 V battery (1 × CR2450) Battery Life Up to 3 years (standby time) Application Indoor, standalone or with the included probe Ingress Protection IP66 Operating Temperature -10 °C to 55 °C Storage Temperature -20 °C to 60 °C Operating Humidity 10% to 90% Mounting Wall, surface Dimensions 62.4 × 62.4 × 14.6 mm Weight 85.5 g Why Choose the Hikvision DS-PDWL-E-WB? Catches leaks early, before water damage spreads The external probe sits where leaks start, while the detector stays mounted out of the way Wireless with up to 3 years of battery life, so there is no cabling to run Joins the same AX PRO system as your intrusion detectors, keypads and sirens Downloads ⬇ Download Datasheet (PDF)⬇ Download Quick Start Guide (PDF) Warranty: 12-month warranty from the Official Distributor.
39.000 JD
The Hikvision AX PRO Wireless Temperature Detector (DS-PDTPH-E-WB) adds temperature monitoring to your AX PRO alarm system. On its own it measures -10 °C to 55 °C; with the included external probe the range extends to -35 °C to 99 °C, for places such as server rooms, fridges or freezers. A big 2.7-inch screen shows the reading on the device, and its modular design suits multiple applications. It connects over Tri-X two-way wireless at 433 MHz with AES-128 encryption, frequency hopping and up to 800 m range in open space, and runs up to 2 years on two AAA batteries. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Wireless temperature detector for the AX PRO system Built-in sensor range: -10 °C to 55 °C Included external probe: -35 °C to 99 °C Big 2.7-inch on-screen display Modular design for multiple applications Front and rear tamper protection; signal strength indicator Tri-X two-way wireless at 433 MHz with AES-128 encryption, up to 800 m in open space Frequency hopping against jamming for reliable transmission Fully remote configurable through the app; enrolment by power-up, remote ID or QR code Up to 2 years of battery life (2 × AAA) Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB Hikvision AX Hybrid PRO panels: through the DS-PM1-RT-HWB 433 MHz Tri-X wireless receiver Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDTPH-E-WB Product Name Wireless Temperature Detector Detection Method Temperature sensor Measuring Range -10 °C to 55 °C (standalone); -35 °C to 99 °C (with included probe) Display 2.7-inch screen Tamper Protection Front and rear Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Security AES-128 encryption Transmission Range (Free Space) 800 m Frequency Hopping Supported Enrolling Method Power-up, remote ID, QR code Battery 2 × AAA, 3 V Battery Life Up to 2 years (standby) Operating Temperature -10 °C to 55 °C Operating Humidity 10% to 90% Mounting Wall Dimensions (W × H × D) 62.6 × 62.6 × 18 mm Weight 73.5 g Application Indoor; standalone or with the included probe Why Choose the Hikvision DS-PDTPH-E-WB? Adds temperature monitoring to the same system that protects against intrusion External probe for fridges, freezers and other places outside the detector's own range Clear 2.7-inch screen for checking the reading on site Wireless installation with up to 2 years of battery life Downloads ⬇ Download Datasheet (PDF) Warranty: 12-month warranty from the Official Distributor.
39.000 JD
The Hikvision AX PRO Wireless Triple Signal Detector (DS-PDTT15AM-LM-WB) is an outdoor detector for gardens, entrances, driveways and building perimeters. It uses two PIR sensors and a 24 GHz microwave with Tri-Signal logic, covering 15 m with a 90° angle that can be adjusted across 180°. Active IR anti-masking, anti-sway analytics, pet immunity up to 40 kg, a 10,000 lux white light filter and an IP65 housing suit it to outdoor use. It connects over Tri-X two-way wireless at 433 MHz with AES-128 encryption and up to 1 km range, and runs up to 5 years on five CR123A batteries. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Triple-signal detection: two PIR sensors + 24 GHz microwave with Tri-Signal logic Detection range 15 m with 92 detection zones 90° coverage adjustable across 180°; adaptable coverage with pattern mask included Active IR anti-masking Anti-sway analytics Pet immunity up to 40 kg White light filter up to 10,000 lux; digital temperature compensation and sealed optics IP65 weather resistance, -25 °C to 60 °C Tri-X two-way wireless at 433 MHz with AES-128 encryption, up to 1 km in open space, frequency hopping Up to 5 years of battery life (5 × CR123A) Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDTT15AM-LM-WB Product Name Wireless Triple Signal Detector Detection Method Dual PIR + microwave (Tri-Signal logic) Detection Range 15 m Detection Angle 90° @ 180° adjustable Detection Zones 92 Sensitivity Auto, low Pet Immunity 40 kg Microwave Frequency 24 GHz (24.15–24.25 GHz) White Light Filter 10,000 lux Anti-Masking Supported (active IR) Anti-Sway Analytics Supported Tamper Protection Front and rear Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Security AES-128 encryption Transmission Range (Free Space) 1 km Battery 5 × CR123A, 3 V Battery Life Up to 5 years (standby; shorter at low temperatures) Operating Temperature -25 °C to 60 °C Ingress Protection IP65 Mounting Wall, 0.8 m to 1.2 m height Dimensions (W × H × D) 75 × 202 × 73 mm Weight 600 g Application Outdoor Why Choose the Hikvision DS-PDTT15AM-LM-WB? Tri-Signal logic with two PIR sensors and microwave for outdoor perimeter protection Anti-masking and anti-sway analytics for exposed outdoor locations 40 kg pet immunity and adjustable 90° @ 180° coverage Wireless installation with up to 5 years of battery life Downloads ⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF) Warranty: 12-month warranty from the Official Distributor.
100.000 JD
The Hikvision AX Hybrid PRO Wired PIR-Camera Detector (DS-PDPC12P-EG2) is a PIR motion detector with a built-in camera for visual alarm verification. It detects movement up to 12 m at 85.9° with 52 detection zones and captures JPEG images at up to 1920 × 1080, so you can see what triggered an alarm. Its infrared fill light reaches 12 m, with a polarising IR lens design for more uniform night illumination, and a large integrated memory buffer stores images. It connects to AX Hybrid PRO control panels over the wired Speed-X Bus with AES-128 encryption, runs on 9–16 VDC (12 VDC typical) and offers pet immunity up to 30 kg. Note: this is a wired detector for the Hikvision AX Hybrid PRO system (Speed-X Bus). It is not a wireless AX PRO device. Key Features PIR motion detection with a built-in camera for visual verification Detection range 12 m / 85.9° with 52 detection zones Image resolution up to 1920 × 1080 (also 1280 × 720 and 640 × 480), JPEG Camera field of view 109° horizontal / 60° vertical Infrared fill light up to 12 m with polarising IR lens design for uniform night shots Large integrated memory buffer for image storage Pet immunity up to 30 kg; sensitivity high, auto or pet SEC (Smart Environmental Control): advanced digital signal processing and 3D optics Wired Speed-X Bus connection with AES-128 encryption Fully remote configurable through the app Works With Hikvision AX Hybrid PRO control panels (Speed-X Bus): DS-PHA48-EP(B) (up to 4 wired PIR cameras) and DS-PHA64-LP(B) (up to 8 wired PIR cameras) AX Hybrid PRO kit: DS-PHA64-KIT-WB(B) (up to 8 wired PIR cameras) Technical Specifications Specification Details Model DS-PDPC12P-EG2 Product Name Wired PIR-Camera Detector Detection Method Passive infrared + video verification Detection Range 12 m Detection Angle 85.9° Detection Zones 52 Detectable Speed 0.3–2 m/s Sensitivity High, auto, pet Pet Immunity 30 kg Camera Field of View 109° (H), 60° (V) Image Resolution 1920 × 1080, 1280 × 720, 640 × 480 (JPEG) Fill Light Infrared, up to 12 m Day/Night Color / black & white Tamper Protection Front and rear Transmission Wired Speed-X Bus Transmission Security AES-128 encryption Enrolling Method Power-up, remote ID, QR code Power Supply 9–16 VDC (12 VDC typical) Operating Temperature -10 °C to 55 °C Operating Humidity 10% to 90% Mounting Wall, 1.8 m to 2.4 m height (optional wall & ceiling bracket) Dimensions (W × H × D) 73 × 130.5 × 56.7 mm Weight 195 g Application Indoor Why Choose the Hikvision DS-PDPC12P-EG2? See what triggered the alarm instead of receiving only a motion alert Full HD images with 12 m infrared illumination for day and night verification Wired Speed-X Bus with AES-128 encryption for AX Hybrid PRO systems 30 kg pet immunity for homes and businesses with pets Downloads ⬇ Download Datasheet (PDF) Warranty: 12-month warranty from the Official Distributor.
70.000 JD
The Hikvision AX PRO Wireless Dual-Tech Detector (DS-PDD12P-EG2-WB) combines PIR and 24 GHz microwave detection for reliable indoor intrusion detection. It covers 12 m at 85.9° with 52 detection zones and offers pet immunity up to 30 kg. 3D optics with creep zone protection give full coverage without dead angles, and the 24 GHz microwave is designed to prevent wall penetration. It connects over Tri-X two-way wireless at 433 MHz with up to 1.2 km range in open space and frequency hopping, and runs up to 5 years on two CR123A batteries. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Dual technology: PIR + 24 GHz microwave Detection range 12 m / 85.9° with 52 detection zones 3D optics with creep zone protection for full coverage without dead angles 24 GHz microwave designed to prevent wall penetration Pet immunity up to 30 kg; sensitivity high, auto or pet Digital temperature compensation and sealed optics Front and rear tamper protection; signal strength and environment temperature indicators Tri-X two-way wireless at 433 MHz, up to 1.2 km in open space, frequency hopping Fully remote configurable through the app; enrolment by power-up, remote ID or QR code Easily replaceable batteries with PCB protection; up to 5 years of battery life (2 × CR123A) Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB Hikvision AX Hybrid PRO panels: through the DS-PM1-RT-HWB 433 MHz Tri-X wireless receiver Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDD12P-EG2-WB Product Name Wireless Dual-Tech Detector Detection Method Passive infrared + microwave Detection Range 12 m Detection Angle 85.9° Detection Zones 52 Detectable Speed 0.3–2 m/s Sensitivity High, auto, pet Pet Immunity 30 kg Microwave Frequency 24 GHz (24.15–24.25 GHz) White Light Filter 6500 lux Tamper Protection Front and rear LED Indicator Green (PIR), red (microwave), blue (alarm) Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Range (Free Space) 1.2 km Frequency Hopping Supported Battery 2 × CR123A, 3 V Battery Life Up to 5 years (standby) Operating Temperature -10 °C to 55 °C Mounting Wall, 1.8 m to 2.4 m height (optional wall & ceiling bracket) Dimensions (W × H × D) 65.5 × 103 × 48.5 mm Weight 141 g Application Indoor Why Choose the Hikvision DS-PDD12P-EG2-WB? Two detection technologies for more reliable detection than a PIR-only detector 30 kg pet immunity for homes with pets 24 GHz microwave designed not to detect through walls Long 1.2 km wireless range and up to 5 years of battery life Downloads ⬇ Download Datasheet (PDF) Warranty: 12-month warranty from the Official Distributor.
55.000 JD
The Hikvision AX PRO Wireless PIR Ceiling Detector (DS-PDCL12-EG2-WB) mounts on the ceiling and watches a full 360° area with a 12 m detection range and 172 detection zones. One detector can cover an open hall, office, shop or reception area from a central position. SEC (Smart Environmental Control) with advanced digital signal processing and 3D optics, plus digital temperature compensation, creep zone protection and sealed optics, supports reliable detection. It connects over Tri-X two-way wireless at 433 MHz with AES-128 encryption and up to 1 km range, and runs up to 5 years on one CR123A battery. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Ceiling-mounted PIR with 360° coverage Detection range 12 m with 172 detection zones SEC (Smart Environmental Control): advanced digital signal processing and 3D optics Digital temperature compensation, creep zone protection and sealed optics Sensitivity: auto or low Front and rear tamper protection; signal strength and environment temperature indicators Tri-X two-way wireless at 433 MHz with AES-128 encryption, up to 1 km in open space Frequency hopping against jamming for reliable transmission Fully remote configurable through the app; enrolment by power-up, remote ID or QR code Easily replaceable battery with PCB protection; up to 5 years of battery life (1 × CR123A) Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB Hikvision AX Hybrid PRO panels: through the DS-PM1-RT-HWB 433 MHz Tri-X wireless receiver Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDCL12-EG2-WB Product Name Wireless PIR Ceiling Detector Detection Method Passive infrared (PIR) Detection Range 12 m Detection Angle 360° Detection Zones 172 Detectable Speed 0.3–2 m/s Sensitivity Auto, low White Light Filter 6500 lux Tamper Protection Front and rear Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Security AES-128 encryption Transmission Range (Free Space) 1 km Frequency Hopping Supported Battery 1 × CR123A, 3 V Battery Life Up to 5 years (standby) Operating Temperature -10 °C to 55 °C Operating Humidity 10% to 90% Mounting Ceiling, 2.4 m to 4 m height Dimensions Ø101.2 × 32.9 mm Weight 109.5 g Application Indoor Why Choose the Hikvision DS-PDCL12-EG2-WB? 360° coverage from a single ceiling position for open rooms 172 detection zones with SEC signal processing and 3D optics Discreet ceiling installation with no alarm cabling Up to 5 years of battery life on one CR123A battery Downloads ⬇ Download Datasheet (PDF)⬇ Download Quick Start Guide (PDF) Warranty: 12-month warranty from the Official Distributor.
29.000 JD
The Hikvision AX PRO Wireless PIR-Glass Break Detector (DS-PDPG12P-EG2-WB) combines a PIR motion detector and an acoustic glass break sensor in one wireless device. The PIR covers 12 m at 85.9° with 52 detection zones, and the glass break sensor covers 8 m at 120°. It offers pet immunity up to 30 kg, digital temperature compensation, creep zone protection and sealed optics, and supports the most common glass types. It connects over Tri-X two-way wireless at 433 MHz with up to 1 km range and frequency hopping, and runs up to 4 years on two CR123A batteries. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features 2-in-1: PIR motion and acoustic glass break detection PIR range 12 m / 85.9° with 52 detection zones Glass break range 8 m / 120° with adjustable sensitivity levels Works with float, plate, tempered, wired, laminated, leaded and double glazing (2.4–6.4 mm, 0.3 × 0.3 m to 3 × 3 m) Pet immunity up to 30 kg; PIR sensitivity auto, high or pet Digital temperature compensation, creep zone protection and sealed optics Front and rear tamper protection Tri-X two-way wireless at 433 MHz, up to 1 km in open space, frequency hopping Fully remote configurable through the app; enrolment by power-up, remote ID or QR code Easily replaceable batteries with PCB protection; up to 4 years of battery life (2 × CR123A) Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB Hikvision AX Hybrid PRO panels: through the DS-PM1-RT-HWB 433 MHz Tri-X wireless receiver Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDPG12P-EG2-WB Product Name Wireless PIR-Glass Break Detector Detection Method Passive infrared + acoustic sensor PIR Detection Range 12 m PIR Detection Angle 85.9° Detection Zones 52 PIR Sensitivity Auto, high, pet Pet Immunity 30 kg Glass Break Range 8 m Glass Break Sensitivity Level 2 (0–2 m) to level 6 (7.2–8 m); level 8 for higher sensitivity (not EN50131-2-7-1 compliant) Glass Type Float, plate, tempered, wired, laminated, leaded, double glazing Glass Thickness 2.4 mm to 6.4 mm Glass Size 0.3 × 0.3 m to 3 × 3 m Tamper Protection Front and rear LED Indicator Green (PIR), red (glass break), blue (alarm) Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Range (Free Space) 1 km Battery 2 × CR123A, 3 V Battery Life Up to 4 years (standby) Operating Temperature -10 °C to 55 °C Mounting Wall, 1.8 m to 2.4 m height (optional wall & ceiling bracket) Dimensions (W × H × D) 65.5 × 103 × 48.5 mm Weight 134 g Application Indoor Why Choose the Hikvision DS-PDPG12P-EG2-WB? One device replaces a separate motion detector and glass break detector Protects rooms with large windows, glass doors or shopfronts 30 kg pet immunity for homes with pets Wireless installation with up to 4 years of battery life Downloads ⬇ Download Datasheet (PDF) Warranty: 12-month warranty from the Official Distributor.
45.000 JD
The Hikvision AX PRO Wireless Dual-Tech AM Curtain Detector (DS-PDC10DM-EG2-WB) combines PIR and 24 GHz microwave detection in a slim curtain detector for windows, doors, balconies and corridors. Its narrow 5° curtain reaches 10 m when wall-mounted (5 m on the ceiling) with 32 detection zones. Two detection technologies help reduce false alarms, while active IR anti-masking, directional detection, pet immunity up to 12 kg (wall mount) and an IP65 housing make it suitable for indoor and outdoor use. It communicates over Tri-X two-way wireless at 433 MHz with AES-128 encryption and up to 1 km range, and runs up to 5 years on two CR123A batteries. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Dual technology: PIR + 24 GHz microwave Slim design for window-frame installation 5° curtain angle with 32 detection zones Detection range: 10 m wall-mounted, 5 m ceiling-mounted Active IR anti-masking and directional detection support Pet immunity up to 12 kg (wall mount) Digital temperature compensation, creep zone protection and sealed optics IP65 weather resistance for indoor and outdoor use Tri-X two-way wireless at 433 MHz with AES-128 encryption, up to 1 km in open space, frequency hopping Up to 5 years of battery life (2 × CR123A); L-shaped adapter included Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB Hikvision AX Hybrid PRO panels: through the DS-PM1-RT-HWB 433 MHz Tri-X wireless receiver Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDC10DM-EG2-WB Product Name Wireless Dual-Tech AM Curtain Detector Detection Method Passive infrared + microwave Microwave Frequency 24 GHz (24.15–24.25 GHz) Detection Range Wall mount: 10 m; ceiling mount: 5 m Detection Angle 5° Detection Zones 32 Sensitivity Auto, pet Pet Immunity Wall mount: 12 kg; ceiling mount: none Anti-Masking Supported (active IR) Directional Detection Supported Tamper Protection Front and rear Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Security AES-128 encryption Transmission Range (Free Space) 1 km Battery 2 × CR123A, 3 V Battery Life Up to 5 years (standby; shorter at low temperatures) Operating Temperature -25 °C to 60 °C Ingress Protection IP65 Mounting Wall or ceiling, 2 m to 3.5 m height Dimensions (W × H × D) 29.2 × 134.4 × 39.5 mm Weight 120 g Bracket L-shaped adapter included Application Indoor and outdoor Why Choose the Hikvision DS-PDC10DM-EG2-WB? Two detection technologies in one slim curtain detector for more reliable detection Anti-masking and IP65 protection for exposed indoor and outdoor locations Pet immunity up to 12 kg when wall-mounted Long-range, encrypted Tri-X wireless with up to 5 years of battery life Downloads ⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF) Warranty: 12-month warranty from the Official Distributor.
49.000 JD
The Hikvision AX PRO Wireless PIR AM Curtain Detector (DS-PDC10AM-EG2-WB) creates a narrow 5° curtain of protection across windows, doors, balconies and corridors. It detects up to 10 m when wall-mounted (5 m on the ceiling) with 32 detection zones, and its slim body is designed for window-frame installation. Active IR anti-masking raises an alert if the lens is covered, it supports directional detection, and its IP65 housing allows indoor and outdoor use. It communicates over Tri-X two-way wireless at 433 MHz with AES-128 encryption and up to 1 km range, and runs up to 5 years on two CR123A batteries. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Slim curtain detector designed for window-frame installation 5° curtain angle with 32 detection zones Detection range: 10 m wall-mounted, 5 m ceiling-mounted Active IR anti-masking Directional detection support Pet immunity up to 12 kg (wall mount) Digital temperature compensation, creep zone protection and sealed optics IP65 weather resistance for indoor and outdoor use Tri-X two-way wireless at 433 MHz with AES-128 encryption, up to 1 km in open space, frequency hopping Up to 5 years of battery life (2 × CR123A); L-shaped adapter included Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB Hikvision AX Hybrid PRO panels: through the DS-PM1-RT-HWB 433 MHz Tri-X wireless receiver Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDC10AM-EG2-WB Product Name Wireless PIR AM Curtain Detector Detection Method Passive infrared (PIR) Detection Range Wall mount: 10 m; ceiling mount: 5 m Detection Angle 5° Detection Zones 32 Sensitivity Auto, pet Pet Immunity Wall mount: 12 kg; ceiling mount: none White Light Filter 6500 lux Anti-Masking Supported (active IR) Directional Detection Supported Tamper Protection Front and rear Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Security AES-128 encryption Transmission Range (Free Space) 1 km Battery 2 × CR123A, 3 V Battery Life Up to 5 years (standby; shorter at low temperatures) Operating Temperature -25 °C to 60 °C Ingress Protection IP65 Mounting Wall or ceiling, 2 m to 3.5 m height Dimensions (W × H × D) 29.2 × 134.4 × 39.5 mm Weight 118.5 g Bracket L-shaped adapter included Application Indoor and outdoor Why Choose the Hikvision DS-PDC10AM-EG2-WB? Focused curtain protection for windows, doors and balconies without covering the whole room Anti-masking and IP65 protection for exposed indoor and outdoor locations Pet immunity up to 12 kg when wall-mounted Long-range, encrypted Tri-X wireless with up to 5 years of battery life Downloads ⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF) Warranty: 12-month warranty from the Official Distributor.
39.000 JD
The Hikvision AX PRO Wireless External Magnetic Contact (DS-PDMCX-E-WB) is an outdoor opening detector for gates, outdoor doors and other access points. Its IP66, UV-stable housing and wide 76 mm detection gap suit places where an indoor contact would not last or where the gap between sensor and magnet is large. It uses Tri-X two-way wireless at 433 MHz with AES-128 encryption, frequency hopping and up to 1 km range in open space. An alarm input (NC, NO or impulse count) adds installation flexibility, and a single CR123A battery lasts up to 5 years. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Outdoor wireless magnetic contact with IP66, UV-stable housing Detection gap up to 76 mm Alarm input supporting NC, NO and impulse count Tri-X two-way wireless at 433 MHz, up to 1 km in open space AES-128 encrypted transmission with frequency hopping against jamming Front and rear tamper protection Signal strength and environment temperature indicators Fully remote configurable through the app; enrolment by power-up, remote ID or QR code Wide operating temperature: -20 °C to 60 °C Up to 5 years of battery life (1 × CR123A) Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDMCX-E-WB Product Name Wireless External Magnetic Contact Detection Method Opening contact Detection Gap 76 mm max Alarm Input NC / NO / impulse count Tamper Protection Front and rear LED Indicator Blue (alarm) Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Security AES-128 encryption Transmission Range (Free Space) 1 km Frequency Hopping Supported Enrolling Method Power-up, remote ID, QR code Battery 1 × CR123A, 3 V Battery Life Up to 5 years (standby) Operating Temperature -20 °C to 60 °C Operating Humidity 10% to 90% Ingress Protection IP66 Dimensions (W × H × D) Sensor: 40.5 × 146 × 40.9 mm; magnetic stick: 30.5 × 146 × 40.9 mm Weight 247 g Application Outdoor Why Choose the Hikvision DS-PDMCX-E-WB? Built for outdoor gates and doors with IP66, UV-stable protection 76 mm detection gap for installations with a wide sensor-to-magnet gap Encrypted, anti-jamming Tri-X wireless with up to 1 km range Up to 5 years of battery life with no alarm cabling Downloads ⬇ Download Datasheet (PDF)⬇ Download Quick Start Guide (PDF) Warranty: 12-month warranty from the Official Distributor.
35.000 JD
The Hikvision AX PRO Wireless Magnet Shock Detector (DS-PDMCK-EG2-WB(B)) combines a magnetic opening contact with shock and tilt detection in one wireless device for indoor doors and windows. It reports when a door or window is opened, when it is hit or forced, and when its angle changes, giving earlier warning of a break-in attempt. It connects to the AX PRO system over Tri-X two-way wireless at 433 MHz with up to 1 km range in open space and frequency hopping against jamming. Two wired inputs let you add wired detectors to the wireless system, and a single CR123A battery lasts up to 3 years. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Magnetic contact combined with shock and tilt detection Shock detection with 8 sensitivity levels and tilt detection up to 25° Detection gap up to 43 mm 2 wired input extensions supporting NC, NO and impulse count Tri-X two-way wireless at 433 MHz, up to 1 km in open space Frequency hopping against jamming for reliable transmission Front and rear tamper protection Signal strength and environment temperature indicators Fully remote configurable through the app; enrolment by power-up, remote ID or QR code Up to 3 years of battery life (1 × CR123A) Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDMCK-EG2-WB(B) Product Name Wireless Magnet Shock Detector Detection Method Opening contact; shock sensor Detection Gap 43 mm max Sensitivity Shock: 8 levels; tilt: up to 25° Alarm Input NC / NO / impulse count Tamper Protection Front and rear LED Indicator Green (contact), orange (tilt), red (shock), blue (alarm) Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Range (Free Space) 1 km Frequency Hopping Supported Enrolling Method Power-up, remote ID, QR code Battery 1 × CR123A, 3 V Battery Life Up to 3 years (standby) Operating Temperature -10 °C to 55 °C Operating Humidity 10% to 90% Dimensions (W × H × D) Detector: 24 × 104 × 24.4 mm; magnet: 13 × 34.4 × 11.4 mm Weight 60 g Application Indoor Why Choose the Hikvision DS-PDMCK-EG2-WB(B)? Three kinds of protection in one device: opening, shock and tilt Early warning when someone tries to force a door or window before it opens Adds two wired detectors to a wireless AX PRO system Long-range, anti-jamming Tri-X wireless and up to 3 years of battery life Downloads ⬇ Download Datasheet (PDF) Warranty: 12-month warranty from the Official Distributor.
30.000 JD
The Hikvision AX PRO Wireless Portable Emergency Button (DS-PDEBP2-EG2-WB) is a small dual-button panic button that stays with the user, on a lanyard, a wristband or in a pocket, and sends an emergency alarm to the AX PRO 433 MHz panel from anywhere within wireless range. Accidental press protection helps avoid false alarms. It measures just Ø38 × 12 mm and 13.5 g, has IP66 protection for daily use, and connects over Tri-X two-way wireless at 433 MHz with AES-128 encryption, frequency hopping and up to 800 m range in free space. One CR2035 battery lasts up to 3 years in standby; a lanyard and wristband are available as optional accessories. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Portable dual-button emergency button Accidental press protection IP66 protection for daily use Tri-X two-way wireless at 433 MHz, up to 800 m in free space, AES-128 encryption Frequency hopping against jamming for reliable transmission Red / green LED indicator and signal strength indicator Fully remote configurable through the app; enrolment by power-up, remote ID or QR code 1 × CR2035 battery, up to 3 years of standby Optional lanyard and wristband accessories Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDEBP2-EG2-WB Product Name Wireless Portable Emergency Button Buttons 2 Tamper Protection None LED Indicator Red / green Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Range (Free Space) 800 m Transmission Security AES-128 encryption Frequency Hopping Supported Enrolling Method Power-up, remote ID, QR code Battery 1 × CR2035, 3 V Battery Life Up to 3 years (standby) Operating Temperature -10 °C to 55 °C Operating Humidity 10% to 90% Ingress Protection IP66 Dimensions Ø38 × 12 mm Weight 13.5 g Application Portable Why Choose the Hikvision DS-PDEBP2-EG2-WB? Help is one press away wherever the user is, ideal for elderly people, patients and staff Tiny and light, with IP66 protection for everyday wear Accidental press protection and a two-button design reduce false alarms Encrypted, long-range Tri-X wireless and up to 3 years of battery life Downloads ⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF) Warranty: 12-month warranty from the Official Distributor.
25.000 JD
The Hikvision AX PRO Wireless Portable Emergency Button (DS-PDEBP1-EG2-WB) is a small single-button panic button that stays with the user, on a lanyard, a wristband or in a pocket, and sends an emergency alarm to the AX PRO 433 MHz panel from anywhere within wireless range. Accidental press protection helps avoid false alarms. It measures just Ø38 × 12 mm and 13.5 g, has IP66 protection for daily use, and connects over Tri-X two-way wireless at 433 MHz with AES-128 encryption, frequency hopping and up to 800 m range in free space. One CR2032 battery lasts up to 3 years in standby; a lanyard and wristband are available as optional accessories. Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Portable single-button emergency button Accidental press protection IP66 protection for daily use Tri-X two-way wireless at 433 MHz, up to 800 m in free space, AES-128 encryption Frequency hopping against jamming for reliable transmission Red / green LED indicator and signal strength indicator Fully remote configurable through the app; enrolment by power-up, remote ID or QR code 1 × CR2032 battery, up to 3 years of standby Optional lanyard and wristband accessories Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB AX Hybrid PRO panels: through the DS-PM1-RT-HWB 433 MHz Tri-X wireless receiver (this model is on its official compatibility list) Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDEBP1-EG2-WB Product Name Wireless Portable Emergency Button Buttons 1 Tamper Protection None LED Indicator Red / green Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Range (Free Space) 800 m Transmission Security AES-128 encryption Frequency Hopping Supported Enrolling Method Power-up, remote ID, QR code Battery 1 × CR2032, 3 V Battery Life Up to 3 years (standby) Operating Temperature -10 °C to 55 °C Operating Humidity 10% to 90% Ingress Protection IP66 Dimensions Ø38 × 12 mm Weight 13.5 g Application Portable Why Choose the Hikvision DS-PDEBP1-EG2-WB? Help is one press away wherever the user is, ideal for elderly people, patients and staff Tiny and light, with IP66 protection for everyday wear Accidental press protection reduces false alarms Encrypted, long-range Tri-X wireless and up to 3 years of battery life Downloads ⬇ Download Datasheet (PDF)⬇ Download User Manual (PDF) Warranty: 12-month warranty from the Official Distributor.
19.000 JD
The Hikvision AX PRO Wireless Emergency Button (DS-PDEB1-EG2-WB) is a wall-mounted single-button panic button for the AX PRO 433 MHz alarm system. One press sends an immediate emergency alarm to the control panel, giving a fast way to call for help from a fixed spot. It connects over Tri-X two-way wireless at 433 MHz with AES-128 encryption, frequency hopping and up to 800 m range in free space. A green keymat is available for medical applications, and one CR2450 battery lasts up to 3 years in work status (triggered 20 times per day). Note: this is a 433 MHz (-WB) device. It needs a Hikvision AX PRO 433 MHz control panel and does not pair with 868 MHz (-WE) systems (see "Works With" below). Key Features Single-button wall-mounted emergency button One press sends an immediate emergency alarm Green keymat available for medical applications Tri-X two-way wireless at 433 MHz, up to 800 m in free space, AES-128 encryption Frequency hopping against jamming for reliable transmission Front and rear tamper protection; signal strength and environment temperature indicators Fully remote configurable through the app; enrolment by power-up, remote ID or QR code 1 × CR2450 battery, up to 3 years in work status (20 triggers per day) Works With Hikvision AX PRO 433 MHz alarm kits: DS-PWA96-KIT-WB and DS-PWA64-KIT-WB AX Hybrid PRO panels: through the DS-PM1-RT-HWB 433 MHz Tri-X wireless receiver (this model is on its official compatibility list) Longer distances: DS-PR1-WB 433 MHz wireless repeater Not compatible with: 868 MHz (-WE) panels and devices Technical Specifications Specification Details Model DS-PDEB1-EG2-WB Product Name Wireless Emergency Button Buttons 1 Tamper Protection Front and rear LED Indicator Blue (alarm) Transmission Technology Tri-X wireless, two-way RF Transmission Frequency 433 MHz Transmission Range (Free Space) 800 m Transmission Security AES-128 encryption Frequency Hopping Supported Enrolling Method Power-up, remote ID, QR code Battery 1 × CR2450, 3 V Battery Life 3 years in work status (triggered 20 times per day) Operating Temperature -10 °C to 55 °C Operating Humidity 10% to 90% Dimensions 63.8 × 63.8 × 17.9 mm Weight 45.5 g Application Indoor, wall mounting Option Green keymat for medical applications Why Choose the Hikvision DS-PDEB1-EG2-WB? A fast way to call for help from a fixed spot in homes, offices, shops, reception areas and clinics Simple one-press operation that anyone can use Encrypted, long-range Tri-X wireless with tamper protection Battery lasts up to 3 years even with frequent use Warranty: 12-month warranty from the Official Distributor.
19.000 JD
You have seen 96 out of 127 products
Discover HIKVISION products at Bestways in Jordan, including video intercom kits and indoor stations, AX PRO wireless and AX Hybrid PRO alarm systems, dash cameras, and professional PA audio equipment such as speakers, amplifiers and microphones.
All HIKVISION products are genuine and come with a 12-month warranty.
